When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think the following list is a good list to start with as far as parts I'm looking for for this restoration. Please PM me if you have anything I'm looking for.
- Red fender wells, the pair.
- Master cylinder with ST stamped on it.
- Spoiler
- Inspection cover for bell housing manual shift.
- Shifter for bench seat car.
- Clutch and brake pedal assembly including plate at firewall and rod to clutch fork.
- NOS Rt Rear Quarter Panel or good rust free piece.
I am also looking for interior, like everything, but I'm hoping to find a donor car, but that's another thread I started.
I'm sure there will be other parts needed, but that should get me started. I will add to the list as this are needed. The problem I face is that this car was disassembled in the late 80's and a lot of the parts where not there when I bought this project.
Thanks to all!!
John
Last edited by friesjh; Jul 17, 2018 at 12:53 PM.
Reason: Parts removed from list
Still looking for a few OEM things.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- Spoiler
- Inspection cover for bell housing manual shift.
- Shifter for bench seat car.
- Clutch and brake pedal assembly including plate at firewall and rod to clutch fork.
- NOS Rt Rear Quarter Panel or good rust free piece.
I will be at the Gettysburg meet if anyone has anything they would want to bring with them, please let me know.
Last edited by friesjh; Jul 17, 2018 at 12:51 PM.
Reason: Parts added to list
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Radiator Support for 71
- Front fender to radiator support braces, the set.
- Complete jack setup.
- Seat belts, complete set.
- Floor boot for bench seat 4 speed.
Last edited by friesjh; Aug 17, 2018 at 11:38 AM.
Reason: Parts added to list.
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set.
- Floor boot for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set.
- Floor boot for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
- Drive shaft including yoke for transmission or just the yoke.
The 71 Muncie does have the same size output shaft as TH400 and same spline count. There are a few different length yokes though.
I would measure mine for you BUT I have a 12 bolt Chev axle. Length of the drive shaft and possibly the yoke too would differ if you have the factory 8.5 10 bolt cover axle....
Last edited by 11971four4two; Oct 26, 2018 at 11:27 AM.
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set.
- Floor rubber boot with all hardware for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
- Drive shaft including yoke for transmission or just the yoke.
- Throttle cable from pedal to carburetor.
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set for bench seat and rear.
- Floor rubber boot with all hardware for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
- Drive shaft including yoke for transmission or just the yoke.
- Throttle cable from pedal to carburetor.
I have a SWEET original drive line from a 71 442 4 speed car .... wide ratio it was ....
it has a beautifuul yoke also
77000 mile garaged car ........
no dents and original u joints still ,,, I think on that one you can still see the stripes....
also the original EB master cylinder and matching calipers and original rotors... and upper and lower control arms in front w good tall upper ball joints
@Scott - I would be interested in the driveshaft, but you are in Washington state. I'm afraid shipping would be too expensive. Same with control arms.
Updated parts list:
Still looking for a few OEM parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it for manual disc brakes.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set for bench seat and rear.
- Floor rubber boot with all hardware for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
- Drive shaft including yoke for transmission or just the yoke.
- Throttle cable from pedal to carburetor.
Still looking for a few OEM/NOS parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it for manual disc brakes.
- NOS Rt Rear Quarter Panel or good rust free quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set for bench seat and rear.
- Floor rubber boot with all hardware for bench seat 4 speed.
- Heat riser tube and exhaust manifold sheet metal.
- Drive shaft for 4 speed car.
- Throttle cable from pedal to carburetor.
- NOS Center caps and retainers for SSI wheels.
about 50.00 to ship the driveshaft
about 65 for the control arms
quality and correct parts for quality and correct cars
either gas and time
or
pay for shipping
it happens to all of us ..................not much local around here for 68 69 GTO parts around me that I need either
I tried to pm you for your email but no response so maybe you will see it here? Couple sets of kick panels various condition one black and other saddle. I've come to realize these are pretty hard to find in any color intact. The driveshaft is 50 yrs old but may be what you need.
My apologies for not replying yesterday, I've been out sick. The stomach bug is going around and I was in no condition yesterday to do anything. I sent my email address to you.
hey this is John in dayton how have you been checking to see if you found a gas tank also I have several driveshafts if you know you length pm or call 937 789 8347 thanks
Still looking for a few OEM/NOS parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it for manual disc brakes.
- NOS right rear quarter panel or good rust free right quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set for bench seat car, both front and rear.
- Floor rubber boot with all hardware for bench seat 4 speed shifter.
- Heat riser tube and exhaust manifold sheet metal for 455.
- Drive shaft for 4 speed car.
I think I have a complete NOS driveshaft.
i have nos throttle cable
have other parts, nos batterytray, lots of little nos detail things likespark plugrubber holders, exhaust manifold bolt tab/retainers, etc. nice correct 1970 442 455 QJet
pm if interested.
Still looking for a few OEM/NOS parts.
- Red fender wells, the pair. looking for a good set of wells.
- Master cylinder with ST stamped on it for manual disc brakes.
- NOS right rear quarter panel or good rust free right quarter.
- Kick panels, black for non AC car.
- Complete jack setup.
- Seat belts, complete set for bench seat car, both front and rear.
- Floor rubber boot with all hardware for bench seat 4 speed shifter.
- Heat riser tube and exhaust manifold sheet metal for 455.
- Drive shaft for 4 speed car.
Is your car a post coupe? Makes a difference for the kick panels. Cant tell from the picture.
Updated list below: Still looking for a few OEM/NOS parts. - Red fender well, just the driver's side. - Master cylinder with ST stamped on it for manual disc brakes. - NOS right rear quarter panel or good rust free right quarter. - Seat belts, complete set of black seat belts for a bench seat car, both front and rear. - Floor rubber boot with all hardware for bench seat 4 speed shifter. - Heat riser tube and exhaust manifold sheet metal for 455. - OAI Hood hold down brackets. The two brackets bolted to the radiator support.
