Resistor for blower motor
October 26th, 2011 | 08:08 PM
#3
Registered User
Joined: Feb 2008
Posts: 11,798
From: Plano, TX
I bet this car has A/C due to the 4-prong resistor....
The 2-prong device at the top of the evap box is not a resistor, but a temperature sensor. It disables the compressor when ambient temps are below freezing.
BTW, welcome to the site!
The 2-prong device at the top of the evap box is not a resistor, but a temperature sensor. It disables the compressor when ambient temps are below freezing.
BTW, welcome to the site!
Thread
Thread Starter
Forum
Replies
Last Post
