Parts needed for 1970 delta 88 w/455
December 29th, 2009, 04:32 PM
#1
Registered User
Thread Starter
Join Date: Dec 2009
Location: menifee
Posts: 80
Parts needed for 1970 delta 88 w/455
1. windshield wipers.
2. trim piece that goes in between the driver and back window on the Left Side.
3. exhaust manifolds from a 65-70 starfire. we want to go dual headers so if know an easier way, please feel free to share.
2. trim piece that goes in between the driver and back window on the Left Side.
3. exhaust manifolds from a 65-70 starfire. we want to go dual headers so if know an easier way, please feel free to share.
December 30th, 2009, 05:59 AM
#2
Moderator
Join Date: Jul 2007
Location: Edmond, OK
Posts: 16,144
To go to dual exhaust on an early B or C body you need the driver's side dual exhaust manifold. I believe this was the "T manifold." You can get high quality reproductions at a decent price from Thornton's. If you do a search on our site I'm sure you will find a link.
Once you install the T manifold on the driver's side you cap off the cross over inlet on the passenger's side manfiold. Better yet, remove the manifold and have the cross over inlet welded shut so there is not chance of it leaking.
Once you install the T manifold on the driver's side you cap off the cross over inlet on the passenger's side manfiold. Better yet, remove the manifold and have the cross over inlet welded shut so there is not chance of it leaking.
Thread
Thread Starter
Forum
Replies
Last Post
oldsdelta67
Parts Wanted
0
June 10th, 2009 12:47 PM
