ISO 1981-1985 98 parts central Pennsylvania

Thread Tools
 
Search this Thread
 
Old July 28th, 2015 | 12:16 AM
  #1  
1983NineEight's Avatar
Thread Starter
Registered User
 
Joined: Jul 2015
Posts: 22
ISO 1981-1984 98 parts central Pennsylvania

I'll be hitting up the junk yards soon but just in case I am looking for the following for my 98.


Front clip that the headlights attach to preferably dark blue
Driver side fender (blue if possible)
Good electronic quadrajet or a rebuilder
OEM radio.
Electric seat driver side motors/switches

Misc just let me know what you have

Yes I mean 1984 sorry for the confusing

Last edited by 1983NineEight; July 28th, 2015 at 08:44 AM.
Old July 28th, 2015 | 03:54 AM
  #2  
1970cs's Avatar
Lansing built
 
Joined: Nov 2011
Posts: 3,255
From: Grand Ledge, MI
FYI by 1985 98's were front wheel drive and a total redesign.

Pat
Old July 28th, 2015 | 12:13 PM
  #3  
oldsmbl's Avatar
Registered User
 
Joined: Jul 2008
Posts: 391
From: greenville, south carolina...USA
I have a bunch of electronic quadrajets for $25 plus shipping. Should be considered rebuildable cores since they have been sitting on a shelf for a couple years. Greg. Gtfolds@att.net. (864)616-4619
Old August 8th, 2015 | 05:57 PM
  #4  
brichar8's Avatar
Registered User
 
Joined: Mar 2013
Posts: 74
From: Baton Rouge, Louisiana
I have three 1984 Ninety Eights. I'm always browsing looking for misc pieces and parts that I can stockpile. I'll let you know if I come across what you're looking for. I recently found a mint Delco ETR casette stereo on E-bay, check there often. Keep in touch.
Brady
Old August 11th, 2015 | 04:19 AM
  #5  
1983NineEight's Avatar
Thread Starter
Registered User
 
Joined: Jul 2015
Posts: 22
Thank you! I ended up adding a aftermarket radio under where the ash tray goes for now.

I fixed my power seats with a missing fuse (PO said the fuse was good so I assumed the seat motors were bad)

I found a rebuilt carb on ebay for $120 shipped I decided to get, Will let you guys know if I need any parts when I rebuild my original.

I am going to be hitting the junk yard eventually, lmk of any parts that are rare on our cruisers, I'll make sure to snag when I see them. I would like to find a rally gauge set! But I think I'm going with aftermarket to have the accuracy I want.

Still searching for the front noise fiber glass panel for the headlights/grill and driver fender both in dark blue.
Old August 11th, 2015 | 08:36 PM
  #6  
deaddds's Avatar
Registered User
 
Joined: Sep 2009
Posts: 2,637
I have to check my part numbers but I think I have NOS hood pads and the bumper rubber pads for front and rear. Not sure if that's a needed part or not.
Old August 12th, 2015 | 09:12 PM
  #7  
Eightupman's Avatar
Registered User
 
Joined: Nov 2006
Posts: 1,190
From: Leasburg, NC
Is the 88 hood the same for a 98? If so I have an aluminum hood, with the correct aluminum hinges... and correct hood pop spring... came off a 1982. White.
Old August 13th, 2015 | 06:26 AM
  #8  
1983NineEight's Avatar
Thread Starter
Registered User
 
Joined: Jul 2015
Posts: 22
Thank you for the replies. Unfortunately I don't really need the pads or the hood.





This is the color of my 98 and the extent of the damage from the deer.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JerseyHarold
Non-Oldsmobile Classified
2
June 15th, 2015 04:01 PM
dynamic63
The Newbie Forum
14
September 2nd, 2013 05:56 PM
Delmont 88 PA
The Newbie Forum
9
June 28th, 2012 10:00 PM
1964F85
Parts For Sale
0
July 5th, 2010 02:31 PM
1964F85
The Newbie Forum
13
February 15th, 2010 06:53 PM




All times are GMT -7. The time now is 03:30 PM.