anthonyP

Looking for a good 71/72 Dual Gate Shifter, with or without console. Have a Pontiac Dual Gate Shifter for possible swap. Thanks.

jensenracing77

I think for the money you could find something more complete but thought I would mention this one. This one is tight with no slop. Don't think it was used much. It was pulled in the 80s. It has a crack but should not hurt anything. The one in my Rallye 350 is the same way. There is a chip in the chrome. also missing the little black **** for the door. Not perfect but would work good. I have $250+shipping on it.

rjohnson442

I have a 72 I can sell for 300

anthonyP

Hello.
What parts are included with the dual-gate, and does it shift properly?
Thanks, Anthony

anthonyP

Hello.
Where is the crack in the dual-gate, and is it a '70 or 71/72?
Thanks, Anthony

jensenracing77

I think they are the same from 70-72 other than the switch? This is a 71-72 without the switch. You can see the crack in the second picture. It is on the greenish plate that the lever is connected to. I have one that is cracked much worse than this one in my Rallye 350 and it don't hurt anything.

anthonyP

Hello JensenRacing77 - Do you have any other parts for the dual-gate shifter besides what is shown in the photos. Thanks, Anthony

anthonyP

Hello RJohnson442 - If possible, can you send photos of the dual-gate shifter that you have for sale. Thanks, Anthony

scott_442

FYI for the interested buyer, the chrome slider plate with the black **** that is missing on Eric's shifter is available from the Parts Place for less than $20. I was going to have one re-chromed but recently found the reproduction at PP. Just thought I'd mention that. Also, another FYI for you, Eric is a completely trustworthy seller.

rjohnson442

https://classicoldsmobile.com/forums...t-shifter.html
here is the link to my post. 300 OBO for everything Pictured.

anthonyP

Hello RJohnson442,

Do you have the **** and chrome slider pieces?

Thanks,
Anthony

anthonyP

Hello Scott 442,

Thank you for the information on the parts and seller.

Anthony

jensenracing77

Sorry I didn't see this earlier. I don't have much else I can let go of right now. I will eventually sell 2 complete setups with console and need to be sure I have enough for those. I thin I could include the transmission brackets, one for the pan and one for the selector. What transmission is it?

rjohnson442

I have a hurst handle that I can throw in with it. it needs a thread adaptor to screw on though. The slider to cover the gate is on there. and the chrome top plate will go with it. I'm not sure I know what other chrome you speak of.