cbogartjr

Hi, am looking for a 1967 442 Trunk Molding. It is chrome & black with Oldsmobile in the center.

bob provost

I have one, needs to be rechromed and painted but the "E" is damaged on name. I don't know if that will help. Bob

rocwal

Hi If bob cant help , I have one also needs rechrome , don't remember what it come off of , I can send you pictures
rocwal
Dan B

67post

67post

I have one that's been rechromed. Keep in mind the texture on the black part won't match your tailight bezels. I doubt you'll find an original with decent chrome on it.

70Post

I have one that has some "defects" BUT the chrome/grain, etc is original and would be considered a very nice driver piece. It's from a Cutlass so the grained area would need to be painted black.

It does have a few small bubbles on the BACKSIDE on the smooth chrome "bar" above the grained area (and only on the half of the smooth "bar" that faces down {that's where water would sit...thus the small bubbles}). You can see slight distortions on the chrome surface on the outside where these are.

The grained area and lettering is SUPER NICE - one small "gouge" on the lower edge but no pits, no bubbles, etc (backside or frontside). The chrome, overall, is still very nice and shiny.

Again, a VERY NICE driver quality piece and a great rechrome candidate since any small bubbling repair would only be done on the smooth upper bar - so no risk of messing with the grain on a chrome job.

Can send detailed pics, etc to an email address. Price won't be ridiculous either....I don't have any need for it (own no '67 cars) and got it b/c it was such a clean piece that is hard to find with real nice grain, etc. Already have the shipping tube for it.

I could also prep and paint the black area at an extra cost.

EDIT: Forgot to mention....no broken studs on this piece either.