cublex

Looking for Body Side Molding for a 1974 Cutlass Supreme (if not new like new)

2blu442

The rocker trim that runs under the door?

cublex

No it is the molding that runs along the middle of the car from front to back

cublex

No it is the molding that runs along the middle of the car from front to back

deaddds

Got a part number? Are you referring to the rubber adhesive type door ding moldings?

cublex

No I don't yes that is the molding I was talking about

Paladin31

I have a set that I believe is complete, taken off a 73 supreme. While I know the 73 Vs 74/5 ha e different part numbers they look very similar to me
if you want pictures let me
know
Brett

TRFREE

Didn't the body side moldings on the 73-4 clip on?

Paladin31

As I know the 72’s have pierced holes for spring clip retainers. My 75 are adhesive backed, the part numbers for 74 are same as 75 so they must also be adhesive
and Considering the carryover of 72 to 73 models delayed due to a strike or something I am
betting when I pull the 73 set I have they will be clip on, and unfortunately not adhesive mounted
so Troy you are correct

deaddds

What body color? Ive had numerous moldings like this and they came in various colors.

cublex

Yes send pics

cublex

rocketraider

I look at 70s BSM this way. The stick-on jobs, even factory, look cheap and ALWAYS tend to come loose after a few years. They're also mounted too high to be any good against door dings.

My vote is leave them off. That car is gorgeous without them.

cublex

Actually they are on there..you may not be able to see them on the pic..they are clip on type..kind of on a track..you can see it better here

rocketraider

OK- I see them. What's the situation with yours? If the vinyl insert is discolored, some fine polishing compound will rejuvenate them.

cublex

Just look kind of dingy, was seeing if I could find some new ones

Bill G

might be worth trying to clean yours up..going to be tough to find all 6 pieces new or good used...no aftermarket that i know of..
not sure what i might have in my spares rack.

cublex

Thanks

Buddyboy

Buddyboy

By any chance would you still have the side body molding off the 73 Cutlass?

Paladin31

Yes I do

Buddyboy

Would you mind sending me some pics? It doesn't have to be tonight. My email is buddyboylyon@yahoo.com
What are you asking for them and where are you located?

cublex

Send pics

Buddyboy

I haven't received a response from you. I would like to see pics of the side trim. Also how much do you want for it. buddyboylyon@yahoo.com

Paladin31

I have not been able to get out and check, as soon as I can I will let you know
Brett

Buddyboy

Any luck checking on the side trim for the 73 Cutlass?

Paladin31

I will make every effort to this weekend, been on the road and flying home tomorrow.
thank you for your patience !
Brett

Paladin31

the pics of molding are from 73/74 Supreme. With a couple 73/4 S mixed in. The 73/4 S & CS share same fender, door, and door lock. Quarter is year specific. They are not NOS or perfect,
thanks again for your patience, best regards
Brett