When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you have picture of items needed ?
I am currently searchin th vertical chrome pieces that hold weatherstrip between side windows in no - pit condition & believe I either have what you need ..
Or find it whenever i hunt my stuff..
If you cant load pix here , get over it ...I'm tryin to...load & get over it..
Put men on moon
..but no olds picture transfers...
Currently looking into reproducing 67 supreme rear 1/4 potmetal trim pieces..in America by car people...so they fit & look good....wondering if anyone else would be interested in such things ?
Last edited by rocketscientis; April 5th, 2020 at 10:27 AM.
Reason: 2 edut
No body makes those rear quarter trim pieces that I have found. Be it Chinese or American. I have many and often the studs are rotted off. Very common problem.
If the ones I have pictured are the moldings the OP is looking for these are stainless on a convertible and Aluminum on a hardtop. The rear ones on a convertible are convertible only and the pinch weld molding is unigue to these as well as they joint together. These are the ones on my 67 442 Converible.
Larry lemoldsnut@aol.com
Last edited by lemoldsnut; April 5th, 2020 at 12:01 PM.
These are known as the B85 option. Stainless for convertible, aluminum for the coupe. I have both coupe and convertible with this option. I was lucky to find these for my 66 convertible on e bay last fall. Note that two long pieces that go around back of the rear window are also different with the b85 option. They are open on the ends where they insert into the shorter curved pieces that fit along the bottom of the quarter windows. These pieces have closed ends on the non b85 cars. There were two of these long pieces on ebay yesterday. they were listed as fitting pontiac olds and buick convertables. I do not know if that is true, good luck
Are the pinch weld moldings different for the b85 option? I am aware that the fuzzies are different as they do not have the stainless bead along the top edge.
i have been looking on ebay and cant find. I tried window sill moldings, door sill molding, belt moldings,window trim and no luck. what verbage did you use to locate
Reveal moldings are a common name for them too. TO BE VERY CLEAR. THE ENTIRE SET OF REVEAL MOLDINGS OR WHAT EVER YOU WANT TO CALL THEM IS UNIQUE TO CONVERTIBLE. IT REQUIRES THE SPECIFIC PINCH WELD MOLDING AND THE QUARTER AND DOOR SECTIONS. ALL ARE CONVERTIBLE ONLY. EVEN ON THE DOORS AS THEY ARE STAINLESS NOT ALUMINUM LIKE ON A HARDTOP.
The picture shown is the ones on my car. You can see on the quarter molding it goes into the pinch weld molding. That is why the pinch weld molding is different. Hope this clears this up.
Larry
Still there. Ebay.com/itm/1966-1967 GTO GS 442 convertible top rear moldings used. Chicago muscle cars is the vendor. Note that the molding for the convertible has a hold on each end where it connects to the piece along the quarter window. This end screws to the body and is covered by the quarter molding.
I do not know if GTO GS and 442 are the same.
Good luck.
April 5th, 2020, 10:23 AM
