I will only have the car for a week, so let me know what you need.

 

Is the radio AM only or AM/FM? If FM. the bar on top will slide left to right.

 

Will the heater fan **** fit a 63 dynamic 88? Do you have that part?

 

The radio is an AM radio.

 

Yes they are the same and I have heater fan ****.

 

Get it running and drive it !!!!!!!

 

Does the motor still turn ?
If so , how much for it?

 

Thanks Dino,

 

The engine turns. I did a compression test this morning and the average pressure of the cylinders was 183 Lbs. Highest was 195 and the lowest was 175, so I am keeping it. The cylinder pressure varies less than the engine in the car that I am driving,

 

I thought about it but way too much rust that is right through.

 

Okay, Udall dibs on the heater fan sold switch **** . $15 plus shipping good with you?

 

I would be interested in the door jamb dome light switches, and as much wiring as you can reach. Mine are missing. Please send me a PM with the cost. Thanks, Jerry.

 

How about the tach? to 94587

Gene

 

Do you want the face plate too or just the tach? I didn't take it off yet so I don't know if they are together or not.

 

PM sent

 

I need both horns if they work. 30110

 

I will try them tomorrow night and see if they work.

 

Here are pictures of the horns. I will send you a PM.

 

Here are pictures of the tach.
Dino

 

Here's what you need to strip off the car before junking:

--driver's side exhaust manifold, if it's the real long one
--rearend third member pumpkin (drop-out part), if it's either a posi OR if it's got 3.23 or steeper (3.42, 3.64, etc.) gears
--all Starfire-specific trim, inside or out
--bucket seats
--console
--any floor-shift stuff
--any manual tranny stuff
--any solid bumpers that are also mostly straight
--any solid/straight doors and fenders, particularly fenders
--aluminum thermostat housing (top waterneck), if solid
--aluminum timing cover, if water neck is solid
--water pump, if aluminum and not cast iron or pot metal

 

How much for the shifter?

 

$60 US + shipping

 

I was hoping to strip the car in a week but things come up and I didn't get in the garage as much as I wanted to. The bumpers and fenders are junk. It is an air conditioned car and the engine is great and I have most of the parts that you have mentioned already off. Dino

 

Dino, Thanks for the pic's, but I'm going to pass. I was hoping the face would have the chrome ring around it.

Gene

 

I am looking for the A/C dash vents on either side of the dash. The gray pieces with the round adjustable vents. Also A/C compressor and brackets. (depending on price, maybe just the brackets).

Adam

 

I asked you if you wanted the face plate. You must not have got the message. Here is the pictures with face plate.

 

I think that I am keeping the AC for my car.

 

Also probably should strip off any curved window glass, 4bbl carb, steering wheel (if not cracked very much at all), good lenses, any other options you might find on the car, and-- if you have any room to store, save the tranny as well if it has the Starfire code on the tag.

 

Here are the pictures of the shifter.

 

I finally got the wiring out and took pictures. The passenger side doesn't look original.

 

That looks fine. There is a rubber boot that goes over the switches, that is always missing. It's supposed to keep the rain out, and that's why and when they go bad, when the boot falls off.
I'll take them. Send me the details. Thanks!

 

All air conditioning parts are for sale. Last night I looked at what was involved to convert my car and it meant cutting up the firewall in 2 places, something that I don't want to do. Everything still has oil in it and the compressor turns freely.

 

PM sent