Extra engines for sale. Most came out of parts cars, but a couple I’d found on Craigslist and at the time thought I couldn’t live without them! Oh well…. Now my garage is too full of clutter to put a car inside. So I’m offering up some of the engines to see if there’s anything here that someone else can’t live without! Your welcome to pick one up if your close enough. Or I can strap it down to a pallet and drop it off with the shipper of your choice. Some of the engines may be runners, but since I can’t guarantee that I’m offering them as cores that you can use for parts or build. If you have any questions, or would like to have the casting dates posted let me know. I can get pictures of anything you’d like to see. Most will not have the bolt on’s such as carburetor, alternator, power steering pump, pulleys, etc. but if you need these things I may be able to come up with them.

1955 324 complete $350
1965 330 short block $150
1965 330 short block $150
1966 330 2bbl $350
1966 425 Toronado, large valve B heads $300
1966 425 Toronado, large valve B heads $400
1967 425 Olds 98 with California emissions C heads $350
1968 350 2bbl, has bent oil fill tube signifying it was an AC car, #5 heads $350
1968 350 short block $125
1968 350 short block $125
1970 350 2bbl #6 heads $300 SOLD
1970 350 2bbl #6 heads $300
1971 350 4bbl #7 heads $300
1971 350 4bbl #7 heads $150
1971 455 4bbl G heads $350
1972 455 4bbl Ga heads $350 SALE PENDING
1972 350 4bbl #7a heads $100 Headless, now a short block
1973 455 4bbl J heads $300
197* 350 4bbl #8 heads $100

Here's a couple pictures of engines listed, I can get more if you'd tell me what you'd like to see.


1968 350
P1010193.jpg



1970 350
P1010192.jpg



1967 Olds 98 425
P1010197.jpg




1966 Toronado 425
P1010199.jpg




1971 455
P1010196.jpg



1971 350
P1010206.jpg



1966 330
P1010204.jpg

 

A 71 350 with egr?

 

I figured someone changed to a 4bbl and got whatever intake they could find. But I should check the vin to make sure its the intake that was changed and not the heads!

 

Now that's a lot of engines... I did not see that many last time I was there!

I notice two coolant sensor bungs on the LH side like the 307, too...

 

They were buried so deep in the garage that you couldn't see them Rob

It's hard to store engines... without some serious racks you can't stack them up. So they take up a lot of floor space!


Did you purchase the property on the Coast?



John

 

pm sent

 

Wow John! That is quite a collection.
Here's a bump for ya!

 

I think there was a LOT that I did not see! I still remember that tower you made from gas tank stacking - wow!

I made the seller test the well water for VOCs and metals and the results due next month will help me make my decision. I think it will be a go...

 

Would like to buy ur 1970 350 better of the two u have need for a rallye 350 need a manual flywheel also same engine Iam in calif would need to ship what is ur zip I can figure shipping any questions here my cell 714-720-8007 Ray. Thanks

 

You should make some engine coffee tables....

 

That is one nice conversation piece! But I have a hunch that the aluminum 215 looks a lot nicer than a cast iron piece would, and would have less chance of putting dimples into the floor!


John

 

I like the console radio in the back round.

 

"Old" shopping carts make good engine dollys, if cut correctly!!

 

I've been using the car dollys from Harbor Freight for engine dollys. When they go on sale it's two for $39.99. I've just been putting blocks of wood to level the engine, but the long term method would be to weld up some brackets to bolt the engine down. You can see them under several of these engines.

 

ttt


I also have loose heads, cranks, blocks, etc.

 

We've had a lot of new members join lately, so updating that I've got a 1954 324 short block I'd take $150 plus shipping for.



John

 

Any knowledge of the condition on the 71 BB? Was it running when you purchased? PM me please. Thanks

 

Anyone with a motor collection like this deserves a bump once in a while. When are you going to open an east coast operation? I don't find much that's relevant in my trips to the local pick n pull.

Good luck with rest of inventory reduction!

 

Thanks for bringing it back to the top. I kinda forgot about this thread! I did sell a couple engines and a set of #7 heads off one of the 350's.

John

 

Would you by chance have a transmission out of a toronado? I would be interested. Pm or call or text 850-210-6381

 

I'll give you a phone call. I have a 1967 driver that turns out to have pretty bad rust around the front and back glass. Not sure what I'm going to do with it yet, depends on how bad the rust is. Here's a link when I was trying to help a friend sell it. In a round about way I ended up buying it Wanna buy the whole car? John

https://classicoldsmobile.com/forums...30-2012-a.html

 

1971 455 4bbl G heads $350

Is that the one in the picture? So the block and heads have no issues? Thanks

 

Can you post a picture of the "1972 350 4bbl #7a heads $150" please.

 

Sorry, I pulled and sold the heads off that one. I do still have the 1971 with 7 heads, its the picture with black duct tape over the intake where the carb attaches.

John

 

Do you have any 455's left?

 

Yes, what part of the country are you in? Your welcome to send me a PM or email with details on what your looking for.

John

 

I am in Coos Bay, not that far of a drive.

 

I bought one of John's cores, it has worked out great!

 

Dang John, I really wish I was able to come get that flywheel from you myself, it looks like I missed out on quite the adventure strolling through your property. I had to take my dads word for it when he said you had a lot of oldsmobile parts. haha

 

If you want to plan a trip over let me know. I can make sure to have some 455's available for you to check out. I've also got a lot of loose heads if you wanted to pick a set that's not on an engine.

John

 

If you ever get down this way please stop by. Its always fun to meet another olds nut

John

 

Hmm this might be a long shot but what about some 2 in. intake valves from a bbo ?

 

I've got a stack of J heads. If I don't have some loose valves I could pull some from one of those. Send me a reminder on Saturday and I'll see what I've got.

John

 

That sounds awesome. Do you have any hoods for a 69 cutlass?

 

Any word on those valves

 

Yes, I've got a 1969 hood.

John

 

Thanks for the reminder... the older I get the more I loose track of things I'll look today.

John

 

tell me what total $$ is for your best 350 short block to Cocoa, FL 32926 is. Thank you for reply.

 

If only I wasn't on the opposite side of the continent.

 

It will take a few days to get the shipping quote. Can you pick up a pallet from a freight company depot?