Freshly Rebuilt "C" 455 Heads - With Pics
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Freshly Rebuilt "C" 455 Heads - With Pics
Selling a set of freshly rebuilt C Heads. Got a set of Edelbrock RPM heads so I want to sell these. I am on Long Island NY but I am willing to ship. Pm me for more info
Price $525 obo
Jim
Price $525 obo
Jim
Last edited by jo75olds; Jun 29, 2011 at 01:40 PM.
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Registered User
Joined: Jun 2011
Posts: 93
From: PHOENIX, AZ
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Thanks Chris, these are a great set of heads
Here is a list of the work that has been done to them
Stock Replacement Valves
Intake 30 Degree Cut
Stock High Output Springs
5 Angle Valve Job on Intake
3 Angle Valve Job on Exhaust
Pockets Blended
Oil Return Holes Opened
Gasket Surfaces Decked
CompCams Rocker Arms Kit with Guideplates
Here is a list of the work that has been done to them
Stock Replacement Valves
Intake 30 Degree Cut
Stock High Output Springs
5 Angle Valve Job on Intake
3 Angle Valve Job on Exhaust
Pockets Blended
Oil Return Holes Opened
Gasket Surfaces Decked
CompCams Rocker Arms Kit with Guideplates
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Still for sale guys, Shipping Quotes seem to be between $100-125 (including the boxes and everything else)
Again, here is a list of what has been done
Stock Replacement Valves
Intake 30 Degree Cut
Stock High Output Springs
5 Angle Valve Job on Intake
3 Angle Valve Job on Exhaust
Pockets Blended
Oil Return Holes Opened
Gasket Surfaces Decked
CompCams Rocker Arms Kit with Guideplates
I am flexable on the price
Again, here is a list of what has been done
Stock Replacement Valves
Intake 30 Degree Cut
Stock High Output Springs
5 Angle Valve Job on Intake
3 Angle Valve Job on Exhaust
Pockets Blended
Oil Return Holes Opened
Gasket Surfaces Decked
CompCams Rocker Arms Kit with Guideplates
I am flexable on the price
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Connoisseur d'Junque
Joined: Sep 2010
Posts: 21,183
From: The Hudson Valley
I mean no disrespect, and I have no need for these heads myself, but the fact that they haven't sold in four months, in spite of a number of people having expressed interest, and in spite of clearly being very high quality parts, may indicate that they are priced too high for the market.
... Just my completely unwelcome 2¢.
- Eric
... Just my completely unwelcome 2¢.
- Eric
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
I mean no disrespect, and I have no need for these heads myself, but the fact that they haven't sold in four months, in spite of a number of people having expressed interest, and in spite of clearly being very high quality parts, may indicate that they are priced too high for the market.
... Just my completely unwelcome 2¢.
- Eric
... Just my completely unwelcome 2¢.
- Eric
Eric, alot of people that expressed intrest I never get a PM back from, I am takeing offers on these, but keep in mind they have $350 in machine work in them
Connoisseur d'Junque
Joined: Sep 2010
Posts: 21,183
From: The Hudson Valley
I'm not saying they're not worth it, just that the market right now, due to the economy and perhaps other factors (season? region? shipping?) might not allow them to sell at a price that they're worth.
It's an unfortunate reality - just as you'd be hard pressed to get back the money you put into a car, it may be the same for very nice parts such as these.
I do wish you the best of luck in selling them, and they do look like excellent heads.
I'll just be quiet now.
- Eric
It's an unfortunate reality - just as you'd be hard pressed to get back the money you put into a car, it may be the same for very nice parts such as these.
I do wish you the best of luck in selling them, and they do look like excellent heads.
I'll just be quiet now.
- Eric
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Registered User
Joined: Jan 2011
Posts: 99
From: Western PA
c - heads
Looking at pictures they appear to be large intake valves ? correct ?
someone should jump on these if they are doing an older 455 build, Im in the middle of a build and bought a set of c-heads for 150 that were rough. sent them to my builder, the bill was over 700. I went a little further on the work but still sounds like yours are worth 450+. Like all good muscle parts, they will only get worth more money if our economy ever bounces back.
someone should jump on these if they are doing an older 455 build, Im in the middle of a build and bought a set of c-heads for 150 that were rough. sent them to my builder, the bill was over 700. I went a little further on the work but still sounds like yours are worth 450+. Like all good muscle parts, they will only get worth more money if our economy ever bounces back.
Thread Starter
Registered User
Joined: Jun 2010
Posts: 173
Looking at pictures they appear to be large intake valves ? correct ?
someone should jump on these if they are doing an older 455 build, Im in the middle of a build and bought a set of c-heads for 150 that were rough. sent them to my builder, the bill was over 700. I went a little further on the work but still sounds like yours are worth 450+. Like all good muscle parts, they will only get worth more money if our economy ever bounces back.
someone should jump on these if they are doing an older 455 build, Im in the middle of a build and bought a set of c-heads for 150 that were rough. sent them to my builder, the bill was over 700. I went a little further on the work but still sounds like yours are worth 450+. Like all good muscle parts, they will only get worth more money if our economy ever bounces back.
I won't hold my breath for the economy, not while we still have a democrat in the office
