I have been collecting Olds stuff for over 30 years. I have too many engines and it's time to clean out some. Anyone looking for complete or parts of engine let me know. (217) 316-0106 I have some carbs, #'s 7040264, 7027156' 7041251 and 7041312

 

Do you have a list of parts? I'm sure there are alot of folks that would be interested in various stuff.

 

217 area code is Illinois

 

I am near Quincy IL and I have about 25 engines of all sizes and heads B, C and G.Too many to list. All are from cars of the 60's and 70's

 

I am just finishing a frame up restoration on a 70 442 w-30 post car. I have had the car since 78 and limiting myself on what I should continue to keep.

 

very cool, lets see some pics. Always a good idea to clean house a bit

 

I am not that good on this computer stuff, but if I can get some to help me I'll try to post pictures.

 

When you reply make sure you are in “Advanced” If it says post a “Quick reply” hit “Advanced”

Scroll down below the box you type in and hit “Manage Attachments” A new box will pop up.

Hit “Browse”

The hit “Upload” and wait a few secs for the pics to up load. Then close this box.
Next you can hit “Preview Post and your pictures should be there.

There is a size limit on pics

 

Do you have a 350 4bl intake with a carb/core that can be rebuilt. car is a 71 supreme does not have to be correct. Just at some point want to change from a 2bl.
Larry

 

My daughter is a student at Quincy University.

I'll check with her and see if she can transport and store an engine in her dorm room until I can get there to pick it up.

 

what about d heads ?

 

I don't think that I have any D heads, didn't scrap any w-30 cars.

 

looking for 69 h/o stuff

 

Looking for something simple 350 4bl intake and carb.
Larry

 

looking for the 1970 bracket that mounts to the back of the drivers side valve cover and holds the power steering hose, as well as any extra valve cover bolts or intake bolts you may have. The three prong vacuum doamathing on the front of the manifold as well

 

Welcome to CO. This thread is going to become a very long one so I am moving it to the parts for sale forum.

 

I can't help you there.

 

Any complete 455's and how much for one.

 

Im looking for a runner. Do you have any good running motors?

 

I have a running 455 that I was going to keep for a future project, I'll sale for $1200 obo, but I'm way down in Texas and dont have a way to ship it

 

I have 2, 1 is red, I think it is out of a 69, and the other is out of a Toronado. $400 for either. I think I have another also.

 

yeah thats alittle far, and more then i wanted to spend. But thanks anyway.

 

Do they run?

 

They both ran but have been sitting 4 or 5 years, but still turn over.

 

do you have a set of complete 5, 6 or 7 heads?

 

I have a set of 4a's but not 5 6 or 7

 

How about an early bolt pattern manual trans flywheel?

Any "A" heads?

 

You really need to start a new thread if you want to sell your engine. Don't steal the guys thread. I am not trying to be a smart azz, just common courtesy.

 

68 or preferably 69 400 g block runner or good core complete as possible manual trans

 

Yes I have a flywheel. I would sell for $100. It has been surfaced and the threads all have been cleaned with a tap. Sorry no A heads. Tim

 

I have a G block bare with main caps that I would take $250 for it

 

Tim,

Any idea what shipping would be to 80015?

Thanks,
Tony

 

Shipping would be around $30 depends on how it is shipped,fast or slow. I will try to get a weight to get a better idea.

 

If you really need As, i have a set for sale in the fore sale section.

 

I am looking for a 350 4bbl intake manifold for my 72 Olds, #410446 on intake.

 

any chance you have a forged 425 crank?

 

By slim chance do you have a set of 30 over 425 pistons?

 

i'm looking for a '65 400 crank, drilled for the pilot shaft, if you have one.

 

I have a 425 crank that I will sell for $250 that I will grind before I send it.

 

Do you have for a 455 f block. Rear dust cover (rear of engine),oil slinger,eccentric and crank shaft gear. Thanks!