425 block, 455 heads
Thread Starter
Registered User
Joined: Jul 2011
Posts: 139
From: Ventura, Ca
425 block, 455 heads
I have a standard bore 425 block number 386525A 1965 A block. It is a bare block that was cleaned and checked 20+ years ago and has been sitting ever since. Clean other than some surface rust. $25
455 "E" heads Bare, small valve, light port work done just to clean up the ports and the crossover has been filled. Cut for 1.550" springs and set up for 7/16 studs. $100
455 "C" heads bare, small valve, stock light port clean up and the cross over filled. $75
I am in California so the shipping would be expensive if you are far away as these things are heavy. I can do truck shipping from work if you just had to have something or want it all. I dont have pics of anything but the "C" heads right now but will try and get some of the other parts if you want.
455 "E" heads Bare, small valve, light port work done just to clean up the ports and the crossover has been filled. Cut for 1.550" springs and set up for 7/16 studs. $100
455 "C" heads bare, small valve, stock light port clean up and the cross over filled. $75
I am in California so the shipping would be expensive if you are far away as these things are heavy. I can do truck shipping from work if you just had to have something or want it all. I dont have pics of anything but the "C" heads right now but will try and get some of the other parts if you want.
Last edited by morepwr; Jun 7, 2016 at 06:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ut442
Big Blocks
5
Mar 9, 2012 11:57 AM
