Some Olds Parts For Sale
#1
Some Olds Parts For Sale
Some Olds Parts For Sale Plus Shipping from 95824
Items with black text are Still For Sale
1. Used - Kenne-Bell MZRH 34 - 39* Hyd. Cam, Lifters, & Dual Springs-No Retainers $150.00
4. Used - Edelbrock 3711, Performer Olds 350 EGR Intake $150.00
Manifold #1, Has a Helicoil on a bracket mount
6. Set of 8 stock 455 con rods with Milodon rod bolts, notched & resized, & honed for floating tool steel wrist pins - $100.00
9. Used - Holley SBO Street Dominator 300-16 intake - $175.00
All of the carb mounting bolt holes and the thermostat housing port has Helicoils.
The coolant ports have some corrosion but can still be used as is.
This is the intake to use if you were going to deck the block and heads for more compression then mill the intake port faces for proper fitment.
Manifold #1
10. Used - Holley SBO Street Dominator 300-16 intake - $200.00
Manifold #2
12. 231 Buick V6 flywheel # 1263279-1 - $50.00
__________________________________
These Items with red text have been sold.
SOLD - 2. New - Elgin E-1074-P Hyd. Cam, & Lifters $125.00
SOLD - 5. Used - Edelbrock 3711, Performer Olds 350 EGR Intake $150.00
Manifold #2
SOLD. - Used but it looks like it has never been bolted down.
Edelbrock 7111, SBO Performer RPM intake - $225.00
Sold - 7. New in box, MOROSO 68300 Tall Chrome Valve Covers, they have plenty of clearance for roller rockers - $100.00
Sold - 8. Used - Oldsmobile V8 std flywheel, 1968 thru 1985 307, 350, 400, 403, 455 - $100.00
Sold - 11. New - ARP 185-6001 1968 & up 400 & 455 Olds 3/8" Rod Bolts - $40.00
-----------------------------------------------------------------------------
Misplaced and can't Find 3. Used - 1966 442 Ft. Fender Vents one is missing a mounting tab $100.00
Items with black text are Still For Sale
1. Used - Kenne-Bell MZRH 34 - 39* Hyd. Cam, Lifters, & Dual Springs-No Retainers $150.00
4. Used - Edelbrock 3711, Performer Olds 350 EGR Intake $150.00
Manifold #1, Has a Helicoil on a bracket mount
6. Set of 8 stock 455 con rods with Milodon rod bolts, notched & resized, & honed for floating tool steel wrist pins - $100.00
9. Used - Holley SBO Street Dominator 300-16 intake - $175.00
All of the carb mounting bolt holes and the thermostat housing port has Helicoils.
The coolant ports have some corrosion but can still be used as is.
This is the intake to use if you were going to deck the block and heads for more compression then mill the intake port faces for proper fitment.
Manifold #1
10. Used - Holley SBO Street Dominator 300-16 intake - $200.00
Manifold #2
12. 231 Buick V6 flywheel # 1263279-1 - $50.00
__________________________________
These Items with red text have been sold.
SOLD - 2. New - Elgin E-1074-P Hyd. Cam, & Lifters $125.00
SOLD - 5. Used - Edelbrock 3711, Performer Olds 350 EGR Intake $150.00
Manifold #2
SOLD. - Used but it looks like it has never been bolted down.
Edelbrock 7111, SBO Performer RPM intake - $225.00
Sold - 7. New in box, MOROSO 68300 Tall Chrome Valve Covers, they have plenty of clearance for roller rockers - $100.00
Sold - 8. Used - Oldsmobile V8 std flywheel, 1968 thru 1985 307, 350, 400, 403, 455 - $100.00
Sold - 11. New - ARP 185-6001 1968 & up 400 & 455 Olds 3/8" Rod Bolts - $40.00
-----------------------------------------------------------------------------
Misplaced and can't Find 3. Used - 1966 442 Ft. Fender Vents one is missing a mounting tab $100.00
Last edited by OldsRacer_68; March 4th, 2022 at 08:41 PM. Reason: adding parts & pictures , spelling, & updating info
#3
The Holley SBO Street Domintor 300-16 intake is available, I have two of them.
The 1st one that I pulled down is pretty good except for the back water ports have some corrosion but can still be used as is. This would be better to use if you were going to deck the block and heads for more compression this would be perfect to touch up the intake port faces for proper fitment.
The 2nd one I still have to check out this week.
I am going to glass bead them both and will have pictures this week sometime.
The 1st one that I pulled down is pretty good except for the back water ports have some corrosion but can still be used as is. This would be better to use if you were going to deck the block and heads for more compression this would be perfect to touch up the intake port faces for proper fitment.
The 2nd one I still have to check out this week.
I am going to glass bead them both and will have pictures this week sometime.
#14
patkep3
Sorry the valve covers are sold and awaiting payment.
The New - ARP 455 BBO 3/8" Rod Bolts are still available and the USPS Flat Rate Envelope shipping looks like $9.00,
Wayne
Sorry the valve covers are sold and awaiting payment.
The New - ARP 455 BBO 3/8" Rod Bolts are still available and the USPS Flat Rate Envelope shipping looks like $9.00,
Wayne
#15
Hi I'm interested in either a Holly or Edelborck intake that has no Heli's in it just bolt and go!...trying to squeeze some extra juice out of my bone stock 350 rocket...please shoot me a picture of what you have that would work out for me...building my 78 Delta 88 in memory of my late wife and years spent as a tech at a Olds dealership...thank you so much!
#16
Hi I'm interested in either a Holly or Edelborck intake that has no Heli's in it just bolt and go!...trying to squeeze some extra juice out of my bone stock 350 rocket...please shoot me a picture of what you have that would work out for me...building my 78 Delta 88 in memory of my late wife and years spent as a tech at a Olds dealership...thank you so much!
The Edelbrock 3711 Performer 350 Intake Manifolds w-EGR is the only one that would be right for a 1978 stock 350 and the one I have does have have a helicoil.
Wayne
Thread
Thread Starter
Forum
Replies
Last Post