Small stash of NOS parts, mostly '70-'72.
#1
Small stash of NOS parts, mostly '70-'72.
All NOS or AC delco parts, 8 track small ***** $45/pair, plastic top of cowl plugs, $2.00 each, '70 nose outer 4(3 of these) & the 2 $25.00 each, gas tank sending unit locking cam/ring $8.00 each, '72 & maybe other year plastic straps, used to hold negative cable to alt. bracket among other places, $5.00 each, service replacement gas pedals, they are something like 3/4 size of originals? $5.00 each, coolant temp switch/sensor, I forget if this is for dummy light or gauge? $25.00, spare tire hold down wing nut $15.00, parking brake handle plastic part $10.00, 2 '70 Cutlass fender emblems $30.00 each, condenser, not sure what application, says delco remy on then end, but no numbers $15.00. All parts plus shipping or pick up here in Indianapolis.
Calls are best but pms work also.
Thanks.
Scott
c. 317-727-7041
ResizedImage_1394461266193_zpscf4cb85e.jpg
ResizedImage_1394461302094_zpscdef0a84.jpg
ResizedImage_1394461343180_zps68cfe7a2.jpg
ResizedImage_1394461367049_zps00e2dda9.jpg
ResizedImage_1394510688082_zpsfdb2036e.jpg
ResizedImage_1394510715953_zps91bda680.jpg
Calls are best but pms work also.
Thanks.
Scott
c. 317-727-7041
ResizedImage_1394461266193_zpscf4cb85e.jpg
ResizedImage_1394461302094_zpscdef0a84.jpg
ResizedImage_1394461343180_zps68cfe7a2.jpg
ResizedImage_1394461367049_zps00e2dda9.jpg
ResizedImage_1394510688082_zpsfdb2036e.jpg
ResizedImage_1394510715953_zps91bda680.jpg
#5
I may want the temp sending unit if it is not spoken for. If it is gauge and not light. You can test it by sticking it in the freezer for 10 minutes and checking continuity. then run hot tap water over it and check it again. If it has two differant numbers it is for gauge. If it don't change it is for light.
Last edited by jensenracing77; March 11th, 2014 at 02:18 AM.
#7
condenser & 8 track ***** sold pending payment.
Eric,
I put the sensor in the freezer & then hot water, readings were mixed, but I don't think it moved much? Also, don't the gauge sensors have the nail head & not the spade?
Eric,
I put the sensor in the freezer & then hot water, readings were mixed, but I don't think it moved much? Also, don't the gauge sensors have the nail head & not the spade?
Last edited by oldspackrat; March 11th, 2014 at 07:12 AM.
#8
The originals are spade and the aftermarket replacement were nail head. Should have been a big differance. I just looked at two originals, One for each and you do have one for the light. The spade sticks out about even with the brass for the gauge and the light has the short black plastic sticking up then the spade out of that.
#11
Hello, Scott.
Please stow away the nicer of the two '70 fender scripts for me, if 1001coins doesn't take them. I have a few parts I still need, will drop you a mail in the next days.
Stefan
Please stow away the nicer of the two '70 fender scripts for me, if 1001coins doesn't take them. I have a few parts I still need, will drop you a mail in the next days.
Stefan
Last edited by Nop; March 11th, 2014 at 09:50 AM.
#14
yep, long day, took me too long to get back on here - would have taken them but they went to a good home in the end
Thread
Thread Starter
Forum
Replies
Last Post
oldspackrat
Parts For Sale
39
September 7th, 2013 08:47 AM
Green Hornet
Parts For Sale
0
March 17th, 2008 04:29 PM