Performance parts
#1
Performance parts
Selling some acquired parts from over the years to reduce my inventory in preparation for moving. The first nine items are serious race car parts I collected in anticipation of building an FED dragster and I have changed my mind and will be sticking with a door car for now. May be willing to sell as a package deal if interested.
8-71 Littlefield blower with bird catcher hat, completely plumbed with hard lines and barrel valve, serviced in 2004 and never run, magnesium front cover, set of pulleys (8mm), pills, belt, tensioner pulley and bracket, retention straps, new blower studs, Enderle 110 pump, and a few other related components $3,000.00
Sharp, polished blower manifold for big block Olds with blow off valve upgraded to a burst panel. This is one of only a handful of these manifolds in existance. $1,000.00
Mallory Super Mag III with coil, cap, and plug wires. This distributor was serviced by Don Zig with new bronze gear and has never been run since. $400.00
One set of chromed zoomie headers (dragster) for Olds. $300.00
Engle solid roller reground ( never run) by Engle to .654 lift 272 @ .050 duration with 114 lobe center $350.00
Comp Cams solid roller lifters (used) .842 dia $200.00
Comp Cams slightly used triple valve springs for solid roller ( seat pressures unknown) $100.00
Titan oil pump for Olds ( used but cleaned and tested) $200.00 SOLD
Three disc Crower clutch with bellhousing, billet aluminum ( steel insert) Olds flywheel, three discs, two floaters, and some related components. $400.00
Edelbrock 7551 Performer RPM intake for big block Olds new in the box. $325.00
2EA Edlebrock Torker manifolds (used) for big block Olds $125.00ea
Offy 360* dual plane intake for big block Olds (used) $75.00
Offy tunnel ram intake lower only for big block Olds $100.00
Offy Port O Sonic intake (used) for big block Olds $175.00
Comp Cams hydraulic flat tappet cam (used) 544 lift 246 @ .050 duration 108 lobe center with matched Comp Cams lifters. Approximately 300 runs in the 11.40's in a 3500lb car with iron heads $150.00
Call or email Grant 951-906-7951 grantw@sportsfacilitiesgroup.com
8-71 Littlefield blower with bird catcher hat, completely plumbed with hard lines and barrel valve, serviced in 2004 and never run, magnesium front cover, set of pulleys (8mm), pills, belt, tensioner pulley and bracket, retention straps, new blower studs, Enderle 110 pump, and a few other related components $3,000.00
Sharp, polished blower manifold for big block Olds with blow off valve upgraded to a burst panel. This is one of only a handful of these manifolds in existance. $1,000.00
Mallory Super Mag III with coil, cap, and plug wires. This distributor was serviced by Don Zig with new bronze gear and has never been run since. $400.00
One set of chromed zoomie headers (dragster) for Olds. $300.00
Engle solid roller reground ( never run) by Engle to .654 lift 272 @ .050 duration with 114 lobe center $350.00
Comp Cams solid roller lifters (used) .842 dia $200.00
Comp Cams slightly used triple valve springs for solid roller ( seat pressures unknown) $100.00
Titan oil pump for Olds ( used but cleaned and tested) $200.00 SOLD
Three disc Crower clutch with bellhousing, billet aluminum ( steel insert) Olds flywheel, three discs, two floaters, and some related components. $400.00
Edelbrock 7551 Performer RPM intake for big block Olds new in the box. $325.00
2EA Edlebrock Torker manifolds (used) for big block Olds $125.00ea
Offy 360* dual plane intake for big block Olds (used) $75.00
Offy tunnel ram intake lower only for big block Olds $100.00
Offy Port O Sonic intake (used) for big block Olds $175.00
Comp Cams hydraulic flat tappet cam (used) 544 lift 246 @ .050 duration 108 lobe center with matched Comp Cams lifters. Approximately 300 runs in the 11.40's in a 3500lb car with iron heads $150.00
Call or email Grant 951-906-7951 grantw@sportsfacilitiesgroup.com
Last edited by h/o guy; December 23rd, 2020 at 02:44 PM.
Thread
Thread Starter
Forum
Replies
Last Post