Just acquired number 41, a '70 S. It has an early 80's 307?350? Supposedly runs with a carb, will sell it cheap!! Lots of trim, partial interior hood lock set up, power trunk set up, but the '70 button is supposed to be chrome with a black button, this one is the later '71 style. It sure looks original? but I guess it could have been changed over the last 40 years or so. Decent looking clock, 14 x 7 snap on cap SS II's. 12 bolt open rear, tail lights, front bumer is straight, but chrome is very tired. Rear bumper is about the same. Trunk & trunk weather strip channel is very rusty. Most body panels have rust, but hood looks pretty nice. It has the bolt in louvers/vents in the rear. Good black dash plastic around radio heater/ac holes, pad is cracked. Rear seat is a good core, has black buckets with seat tracks & backs & sides & headrests, they need recovered, but they are pretty nice cores. No console or shifter, someone just threw the buckets in there in place of the bench. The car had the optional automatic seat back release with the two pin switches in the door jamb. Never seen this on a bench?? Most of the AC parts are there.
http://s856.photobucket.com/albums/a...ile%20Uploads/
All parts are located in Indianapolis. I can ship or you can come get them. Tons of other parts also.
Scott
c. 317-727-7041

 

Do you have the original side chrome for the 70 s? all 6 pieces? Thanks Orrick

 

How much for the clock?

 

Power trunk setup works? How much please and thank you.

C.J.

 

fourtwenty, I'm a bit confused, I think there were 8 pieces on the S? 2 on the fender,2 on the door, 2 in front of the rear wheel, & 2 behind it.I'm pretty sure I can come up with a whole set though. Let me check & get back to you with some pictures.

My442, the case has some light surface rust on the back, but the hands & lens are pretty nice. It is a Borg & can be converted to quartz movement that will then keep excellent time. How about $35.00 shipped?

texasred, I've got one guy in front of you on the power trunk set up. I'm asuming it works, but will remove the button & test the solenoid this weekend & let you know if he declines.

 

Hi Scott, I need the coil wire and if equipped, the tach wire.
I'm planning to update my car from points to HEI this summer.
So far, I can't find the wiring to make the change.
If this is something you can part with, let me know and I'll send you a pm.
stetzie

 

How much you want for the seats?

 

You're right 8 pieces of trim. Thanks for the heads up. Cheers Orrick

 

I will take the clock.

How do you want the $$$?

 

Sorry for the slow responses, was doing the family thing all weekend.

fourtwenty, I'll have pictures tomorrow.

My442-I'll send you a pm with info.

stetzie-I'll find out about the coil wire tomorrow. No tach in the car.

dannymoz71-Just saw your message & put the seats on ebay a couple hours ago. $375.00 reserve. Open to offers over that.

 

how much for the rock shield shipped to 95687
thank you

 

do you have any 70 cutlass s door body molding with the green vinyl

 

Here is a link to pix of what I have. Three pieces of molding with, what looks like the green vinyl has been painted over? or dyed?? You can see some green through the black? Don't know if this will do you any good so let me know. I've got other trim like this with all black vinyl on it if you need more pieces.
Thanks.
http://s856.photobucket.com/albums/a...ile%20Uploads/

 

any damage to the vinyl, can you give a cost with shipping to rochester,ny

 

The three pieces that are "green" are pretty nice. They have a few small nicks & scratches, but nothing serious. I really haven't checked the other ones, but I can if you want those too. However many you want, how about $35.00 shipped to you for these three pieces? If you want more, I'll make it affordable.
Let me know & thanks.
Scott

 

i will take the long and the short one, send me your phone # please thank you tom

 

Hey Scott,

Hope all's well, i saw a fender posted up there on your photobucket site, do you have a pair for 70-72 fenders? I'm looking to replace my rusted out ones sometime in the next couple months.

Thanks!

-Tony

 

I've got 2 or 3 pretty nice drivers fenders & 1 nice pass. fender. Give me a call for more info. & prices if you want.
Thanks.
Scott
c. 317-727-7041

 

Just have to say I LOVE your cruiser! If I could ever lay my hands on one I would go the OAI hood route....just awesome.

 

Is the radiator core support the same on a 70 as a 68? There is a guy on here looking pretty hard for a core support.

Chris

 

Chris,
I'm pretty sure the '68 core support is quite a bit different than a '70. Hopefully someone can tell us for sure & thanks for the lead & kind words.
Scott

 

Do you have the center dash vent duct and center floor grille/duct

 

Ive got any & all duct work you need. Give me a call for prices & shipping info?
Thanks.
Scott
C. 317-727-7041

 

Would you happen to have the passenger side wiper arm? Thanks.

 

I've got a nice one, how about $15.00 shipped? If ok, pm me with your shipping & payment info.
Thanks.
Scott

 

I need 2 trim rings and 3 rally center caps if they are 14 inch rally rims
also shipping to 60804. thanks again

http://s856.photobucket.com/albums/a...Unknown-70.jpg

 

Thanks Scott - for getting back to me so quickly. [EDIT] Thanks also for shipping it priority mail - above and beyond, my friend. Thank you so much - It is people like this that make this a great forum.