When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Parting Out – 1967 Oldsmobile Cutlass Supreme (Green Texas Title in my name and items located in North Texas.)
Trying this again with prices. Everything is OBO. If you want something not listed, please PM.
Hey all, The time has come to clear out the garage. Having too many projects, this Cutlass has been sitting. Therefore, I think it’s time to help others with their projects. I’m attempting to part out the entire vehicle and parts. However, I’d sell everything if someone wanted the project. I can ship all the smaller stuff. The larger sheet metal, body, etc. would most likely need to be picked up.
If you have any questions, please let me know. Thank you
*Sorry for the large photos.. Wasn't sure how else to show them. LMK what you need and I can work on specific photo.
Fenders - $400ea, hood -$550 Seats.. $400ea, Doors with inner parts- $300ea Body with tip over jig and clean title - $3k Center Console, Shifter, and linkage - $650 Complete dash with all gauges, radio, ac, and key - $2500 Front steering box - $150, Upper and lower arms - $300 A Body Frame - $1000 Rear end - complete - $500 Pans - $200
Hey all, The time has come to clear out the garage. Having too many projects, this Cutlass has been sitting. Therefore, I think it’s time to help others with their projects.
I’m attempting to part out the entire vehicle and parts. However, I’d sell everything if someone wanted the project. I can ship all the smaller stuff.
The larger sheet metal, body, etc. would most likely need to be picked up.
If you have any questions, please let me know.
Thank you
*Sorry for the large photos.. Wasn't sure how else to show them. LMK what you need and I can work on specific photo.
Last edited by schmee; Feb 1, 2025 at 10:06 PM.
Reason: price
If and when you get to selling small components (and I say that because I understand if you don't want to part that far and would rather sell major assemblies and that's fine) I would be interested in the following, depending on price and condition:
1. All keys and lock cylinders: ignition cylinder, bezel, door cylinders, and their keys. Glove cyl, console cyl, trunk cyl, and their keys.
2. Antenna assembly, assuming no dings. Mast, plastic nut, chrome trim, base, cable to radio, any brackets along the way. Back bracket for the radio. Radio ***** if you have them.
3. All 3 mirrors.
4. If you wish to further part out the dash: headlight switch, wiper switch, AC center vent dummy plate.
5. Depending on if there's pitting, if there's broken studs, and how you feel about shipping something long, I could possibly use the entire belt stainless molding set. 14 pieces (quarter panel back, rear wheel, quarter panel front, door, fender back, front wheel, fender front) x 2 sides; 14 pieces.
I need the items in 5 less than the others, so, if you want to sell those piecemeal to those in need, they should get them.
1. keys and lock cylinders aren't complete. Some missing .... 2. Antenna assembly is bent 3. All 3 mirrors. I have mirrors! 4. Not parting out the dash at this time. 5. I have chrome but its not pretty.. Prob wouldn't be worth it honestly...
Parting it out, that's too bad. I had a bunch of good times in that car. I had a bad feeling when I sold it to the guy you bought it from. I couldn't keep them all but actually wish I'd have kept that 67 instead of the convertible I did keep. I still have the new channel repair piece I bought for the bottom of the windshield and just sold a new tinted windshield I had for it to my trim guy for his 67 Chevelle. I pulled those tires and 14 inch Fenton slot wheels from an orange 71 Cutlass S I acquired from a friend. It was a super rusty Illinois car and when I picked it up with my tow truck, the frame broke in half over the rear axle.
Koda the mirror on the passenger door is a driver's side mirror not a passenger side mirror and the body trim has the right rear wheel well trim from a sport model Cutlass cut down with snips to somewhat fit the car. The map light rear view mirror was removed from a Buick many years ago. Pretty sure the headlight switch is an old aftermarket replacement I put in along time ago.
Is the emergency brake light lens and bezel available? I'm trying to find something I need off the car to add to my 67 Cutlass convertible as a small tribute to that car before it's just a memory.
I remember chatting with ya... I have two other projects so one had to go. lol
I haven't come across the brake light lens. Ill let you know if I do.
Still have the wheels fyi.
I get it. I have a 77 Trans Am that we have been cutting out the rusty floors and welding in new this week and an 87 GTA that I'm refinishing the wheels on. I'd want that car, if I had somewhere to put it which is why I sold it in the first place. Too many cars and too little time and no more storage.
I'd consider it if it was still a running, driving car I could move around and if I could store it at your place. Plus I'd want to pay what I sold it for.
PM sent.
