NOS Convertible Rear Speaker Pkg. 1971 1972 Cutlass 442 Hurst Olds
February 4th, 2023, 02:05 AM
#1
Registered User
Thread Starter
Join Date: Jul 2012
Location: Latrobe, Pa.
Posts: 4,629
NOS Convertible Rear Speaker Pkg. 1971 1972 Cutlass 442 Hurst Olds
***BUMP*** Now $325.00 Can deliver to the Carlisle, Pa. swap meet this week. ******** NOS Oldsmobile dealer accessory package, part # 983276. Bi-Phonic Rear Speaker for the 1971-1972 "A" body cars. The box is a bit distressed, the contents are complete and in nice condition. The speaker is the correct 6X9 "shallow" dish type, Delco part # 7301803. It has been bench tested and works fine. There are no tears in the cone or the protective cloth cover. Includes the grill and nuts, fader ****, all the wiring and clips, and the 6 page instruction sheet. Nothing missing. $499.00 PM me if interested.
Last edited by BeenThere; September 24th, 2023 at 05:14 AM.
February 6th, 2023, 11:35 AM
#5
Registered User
Join Date: Nov 2017
Location: North Royalton, OH
Posts: 1,336
Jimmy, I believe the '70 grille is a separate piece from the speaker assembly - that is, with this particular '71-'72 part the speaker grille bolts go through the speaker mount holes and the assembly is mated together, In '70, the speaker could be removed without removing the grille.
February 6th, 2023, 06:16 PM
#6
Escape From The Ordinary
Join Date: Oct 2014
Posts: 1,879
Jimmy, I believe the '70 grille is a separate piece from the speaker assembly - that is, with this particular '71-'72 part the speaker grille bolts go through the speaker mount holes and the assembly is mated together, In '70, the speaker could be removed without removing the grille.
February 7th, 2023, 06:11 AM
#7
Registered User
Join Date: Nov 2017
Location: North Royalton, OH
Posts: 1,336
These are the bolts that mount the '70 rear speaker to the seat back metal, then the speaker grill attaches with the Phillips screws.
I'm sorry, Bill - getting off track on your for sale post. I don't know where you come up with all these cool parts!!!! You could use everything in your kit here on a '70 and just buy the grille and nuts separately, if perfection was your goal. Everything else is the same.
Last edited by BSiegPaint; February 7th, 2023 at 06:15 AM.
February 7th, 2023, 10:07 AM
#8
Registered User
Join Date: Mar 2007
Location: eastern MA
Posts: 3,287
I haven’t delved that far yet but I was thinking the speaker mounted to the metal frame underneath the package tray and there were holes cut out underneath the Mesh on the package tray for the sound to come through? I haven’t even looked at assembly manual in regard to this.
February 7th, 2023, 10:45 AM
#9
Registered User
Join Date: Mar 2007
Location: eastern MA
Posts: 3,287
These are the bolts that mount the '70 rear speaker to the seat back metal, then the speaker grill attaches with the Phillips screws.
I'm sorry, Bill - getting off track on your for sale post. I don't know where you come up with all these cool parts!!!! You could use everything in your kit here on a '70 and just buy the grille and nuts separately, if perfection was your goal. Everything else is the same.
February 7th, 2023, 10:50 AM
#10
Registered User
Join Date: Mar 2007
Location: eastern MA
Posts: 3,287
I think these are correct for the hardtop anyway
https://www.inlinetube.com/collectio...yword=Inl10419
We all cant have w30 convertibles
Sorry I didnt know this was about convertibles from the go
https://www.inlinetube.com/collectio...yword=Inl10419
We all cant have w30 convertibles
Sorry I didnt know this was about convertibles from the go
Last edited by scrappie; February 7th, 2023 at 11:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
BeenThere
Parts For Sale
2
December 23rd, 2020 11:55 AM
BeenThere
Parts For Sale
1
March 27th, 2020 04:32 PM
BeenThere
Parts For Sale
0
December 7th, 2018 05:48 AM
BeenThere
Parts For Sale
2
February 12th, 2017 04:13 PM
