11-26-2012 Some items sold & price drops on some of the remaining stock.

Still sorting out some of the parts I got a couple weeks ago & here are some more nice or NOS items. All prices are plus shipping & I will combine shipping.
Check the pictures carefully & I can get more detailed info/pictures of anything.

Three NOS AC PF30 oil filters. These are the white ones that I think originally came on a lot of cars from the late '60's to mid '70's. The boxes are a bit tattered & beat up, & two of the filters have some TINY specks of rust on the bare metal part, but will clean up easily & look very nice otherwise. Like to get $100.00 each. SOLD

NOS Dash wiring harness for the optional courtesy light package. $30.00. SOLD

NOS blower motor capacitor with attached harness. $20.00 SOLD

Two new washer jar caps. $5.00 each.

New rear coil spring insulator. $5.00.

Four new bucket seat bumper. Visible when you tilt the seat forward. $10.00 a pair, or $15.00 for all 4.SOLD

New Gas cap, oil cap, & radiator cap, $5.00 each. SOLD

NOS dashpot for carburetor. $75.00. SOLD

Nice used dashpot $45.00. SOLD

New high beam headlight switch $10.00 SOLD

New Thermactor switch, small round plastic piece inside the air cleaner $20.00

Six new door strikers $15.00 each.

Two horn contact kits, small spring & plunger & plastic ring $5.00 each. SOLD

New GM timing gear with nylon teeth. $15.00

Two oil pressure switches, terminals are not exactly like factory & they are for the cars WITHOUT the rallye pack(gauges) $10.00 each.

Two NOS coolant temp switches $15.00 each.

Two NOS pcv valves CV679C $7.00 each.

One NOS wiper motor shaft, from inside the motor to the wiper linkage $15.00.

Two NOS '70 Cutlass fender emblems G.M. parts $40.00 for the pair. SOLD

Two rubber elbows for the pcv system. $5.00 each. SOLD

New or NOS distributor vacuum advance $15.00. SOLD

Nice used starter brace & shield $25.00 for the pair. SOLD

Crank case breather filter G.M. $18.00.

New jack hook with wing nut $15.00 for the pair. SOLD

New hood insulation square push in clips. $5.00 for the bag. SOLD

New repro radiator & heater hose clamps. $10.00 for the set. SOLD

NOS G.M. antenna lead from windshield to radio $25.00. SOLD

Nice, pretty clean original voltage regulator with correct cover $20.00.

New repro voltage regulator $30.00.

New under hood vacuum line with white stripe $5.00. SOLD

New washer hose $5.00. SOLD

Nice used vacuum switch for non AC cars? $15.00. SOLD

New repro front license plate bracket $18.00.

New '70 Cutlass license plate frame $7.00. SOLD

New repro 4 bbl throttle cable $50.00. SOLD

Misc. radiator tags OR, OU, & WS $10.00 each. SOLD

Several decent/nice '70-'71 Supreme, SX wide side moldings. Price depends on which part you want. I also have a few more nice of these moldings.

One rechromed '70 hood spear, nice, but not perfect. Still has some very small imperfections. $30.00. SOLD

New differential vent $5.00. SOLD

Overview picture of parts.
http://i856.photobucket.com/albums/a...-42-40_586.jpg

More details, next three links.
http://i856.photobucket.com/albums/a...-43-00_361.jpg

http://i856.photobucket.com/albums/a...-43-11_234.jpg

http://i856.photobucket.com/albums/a...-43-58_461.jpg

PF AC 30 oil filters.
http://i856.photobucket.com/albums/a...-44-05_690.jpg

Supreme side moldings.
http://i856.photobucket.com/albums/a...-44-21_693.jpg

Radiator tags.
http://i856.photobucket.com/albums/a...2-40-38_96.jpg

 

In the third link, about in the middle is a rubber elbow which connects into the factory breather element in the valve cover, pictured in the right corner of same picture.

How does that elbow connect to the air cleaner? Is another hose needed? Is that the same hose that comes from the air cleaner?

 

PM sent

 

Scott,

I need the rubber gasket that goes underneath the rear defogger grill.

Sent you an e-mail

Paul

 

A metal vent pipe (black in color and with a slight bend in the middle) connects to the rubber elbow. The other end of the pipe is connected to different elbow in the air cleaner base.

You can see the vent pipe in 4th link, top middle. The pipe for a 350 cid is slightly shorter than one for a 455.

 

Mike,
Thanks for answering that for me.

 

pm sent

 

PM sent for the below:

NOS dashpot for carburetor. $75.00.

NOS G.M. antenna lead from windshield to radio $25.00.

 

Rocket vapor, sorry, both of those are spoken for.

 

New Gas cap, oil cap, & radiator cap, $5.00 each.


sounds great

lemme ck them photos
shoot, wrong for my car

What is the ID on that distributor vacuum advance unit? ###-##
Width or PN on that plastic timing gear? SB's are narrower and I have a dozen of those.

 

New Gas cap, oil cap, & radiator cap, $5.00 each. SOLD

Just to confirm, all three sold or the last one? I could use an oil cap.

 

Ron, all the caps are sold, but I do have some nice used ones if you're interested? What year is your car? Octania, I'll check & get back with you.

 

1970. I have a chrome aftermkt on there & it fits like crap.

 

I am interested in the 70 cutlass hood spear. What are the imperfections on it? Could you send me some closer pictures of it.

 

I need the elbow from that valve cover breather, and the elbow piece in the forth link that connects to the air cleaner. Not sure what you call them, pm me with price?

If they've both been sold, do you still have have pictures, maybe I can use the part number to find them elsewhere. Also, are both horn contact kits been sold?

Thank You.

 

I bought a few things Scott offered above, and all were received in described or better condition. Great service, too

 

I bought a part from oldspackrat and it was in better than described condition. Great seller.

 

Ttt

 

PM sent

 

never received the dashpot or any answer via PM...!!?

 

Kay,
Here is a picture of the customs label, I shipped it out on November 26th. This is the first I've heard about this part not making it there, besides the pm. The pm hit my mailbox at 11:53 last night & I was working all day today & just saw it a little bit ago. Maybe you can input the number at the top of the label & see if it's in their system. I am going to ship some parts tomorrow, I'll take the label & see if they can tell me anything on this end.
Please feel free to get back with me in a day or two?
Thanks.
Scott
http://i856.photobucket.com/albums/a...-18-27_125.jpg

 

hey scott,

maybe there's some delay because of the holidays

thanks for the info...i'll let you know

 

Hey Scott,

Do you have a nice passenger side wiper arm? The spring is rusty and busted in mine

Cheers,

-Tony

 

Hey scott would like to get the blower capacitor. and if u have a good ground strap that run from to fire wall to the cyl. head With u could u put it in at pile for me thanks ray

 

Tony,
I'm sure I can get you a good wiper arm, or just the spring if you want one? Lmk.

Ray,
I'll start a pile for you, good to finally meet you & let me know what else you may need.
Scott

 

How much do you want for the set of 70 chrome mouldings?

 

Hey Scott,

I wrecked the last spring trying to take it out. So both would be great. If you could pull something out whenever you have time that would be great!

Cheers,

-Tony

 

Is the dash wiring for the courtesy lights definitely sold. If not, please let me know.
Thanks, Anthony

 

Anthony,
It is sold, one of the guys from Inline tube bought it at a show recently. I have several nice used ones though if that will do.
Still trying to get the codes for you too.
Scott

 

Hi Scott.

Let me get back to you on the wiring harness. Thought it would be nice to have new wiring for the courtesy lights. Not sure if we have a used wiring harness or it's condition. How much would it be just in case we do need it? Thanks for checking on the axle codes.

Anthony

 

Anthony,
About $20.00-$25.00 shipped depending on your location?
Scott

 

Tony,
Shoot me a pm with your address again & I'll get one on the way. I have about 25 sets of wiper arms in boxes & I'm sure I can find one that is useable. $25.00 shipped reasonable?
Scott

 

Tony,
Here are a couple pix of a good wiper arm. It needs a good cleaning, but the spring just has surface rust & should be good for many years to come.
$25.00 shipped?
Scott

 

Beautiful!

I'm working offshore until the 21st, I'll drop you a line when I get back and we can arrange shipment/payment.

Cheers,

Tony

 

Man if I didn't know you better this is just like the response you'd get from a lot of those scam artists who are working on a drilling rig offshore.... How's the Cutlass build going Tony? Haven't seen much from you about the car. Take that spring out and bead blast, it will look like new. Spray it with clear to keep it from rusting again. That wiper arm can be buffed up like new.

 

Hey Al,

Car is actually going great! I got sick an tired of doing thing half assed so I stripped the car of all trim, doors, fenders, decklid, chrome. Took the car down to almost bear metal and primed and put down the first coat of DuPont paint.

I have so many pictures but can't upload from a cell phone.....

 

You going to start a new thread with the build or start a new one under "Body & Paint"? Really looking forward to seeing the before, during and after pics. Just a thought, since you've got the front clip off, why not lift the body and get at that nasty frame? Just got my frame all done yesterday and am waiting a few days for paint to cure before reinstalling brake lines and parts.

 

Hey Scott,

So i'm back in the saddle, do you think you can do 25 shipped to Montreal by USPS? If you need a couple extra bucks let me know and i'll send you a payment today.

Cheers,

-Tony

 

Tony,
$25.00 should work. Just pm me your address again & I'll get in on the way in a day or two.
Welcome back!
Scott

 

Hey Scott,

got the wiper blade, it cleaned up great.

-Tony