I've got a lot of '70-'72 parts, see the pictures for some of the stuff. I've gots lots more stuff also & a few cars, a '67 442 shell, 2 '71 4 doors, '72 Supreme rough project, Supreme quarters(repros installed on a shell) vista parts, 4 door parts, some convertible parts, lots of small detail parts.
http://s856.photobucket.com/albums/a...ile%20Uploads/
Also have some '71 skylark & '71 GS parts available, & some G body stuff.
All parts are located in Indianapolis & can be shipped about anywhere or picked up here.
Scott
c. 317-727-7041
Cutlass Depot

 

I am lookiing for a good trunk lid, and driver side fender. Small rust spots okay. Red would be awesome. Thanks, Steve

 

I've got 2 '70-72 convertible/4 door trunk lids, both pretty nice. No other lids at the moment. No nice fenders right now either.
Thanks.

 

Hey Scott,

Hope all's well, I'm slowly looking around for a hood for my 72 Cutlass 'S'. (was driving the other day and the louvers flew off my current rusted/dented/eyesore hood).

Do you have any hoods? (either louvered or OAI would be great too)

If not, i can definitely wait since the winter is setting in slowly.

Also other small things i'd need. A stone shield for the front end and those headlight housings that the aluminum bezels attach to.

Thanks Scott, let me know what you've got!

Cheers,

Tony

 

Tony,
I have plain steel hoods & a few louvered hoods, I'll have to check the conditon & get back to you. I've got one '71-'72 OAI hood. It needs work, but should be an easy fix.
I have a few stone shields in stock as well as the plastic headlight housings. I can get pictures of most of this stuff in a day or three, or give me a call for more info.
Thanks.
Scott
c. 317-727-7041

 

Hey Scott,

Pictures would be great, I'm definitely interested in the plastic parts, I guess a hood will depend on how much you think shipping will cost and such, I'll give you a shout later today.

Thanks!

Tony

 

Hi Scott, looks like you have quite a lot of stock there!


i need '67 quarter windows, '67 upper tail lamps & '67 dash AC vents

i wanted to see how good your '67 driver door window rear channel is. mine has lost all its fur.

how much with shipping to 48316 in Michigan

thanks!
Steve

 

Hlello Scott,
What year is the cruise control and how complete?

Any rust free 71-72 radiator supports?

Thanks,

Bill

 

Bill,
Here is a link to pictures of the cruise parts I have. Not sure what year it's from, but most of the parts are '70-'72.
No rust free radiator supports right now.
Let me know & thanks.
Scott
c. 317-727-7041
http://s856.photobucket.com/albums/a...ile%20Uploads/

 

Hi, wondering what you might be asking for the skylark and whether it was just a parts car or not. Thanks

 

Vega,
The '71 skylark is a pretty complete car, no title though. Previous owner said he had it, but it was lost when he moved.
I've got that whole car & a '71 GS shell. You could make a pretty nice one out of the two. No title for the gs either.
Give me a call if you want to come look at them. They are located on the east side of Indy, near the state fairgrounds.
Thanks.
Scott
c. 317-727-7041

 

Hi scott
looking for a set of valve covers for a 71 350
rust free and no dents
how much shipping to new york 11731
thanks rob

 

is that a raccoon in one of those pictures? haha

 

There is a user on here looking for power seat switch. Do you have any of those?

 

864 237-2390

 

That is a raccoon, the yard with the red 65 442 had 3 of them in the office as pets. They were playing with the yard dogs.

I've got a power seat set up from a bench seat complete with the switch, but I hate to sell just the switch.

 

Would you happen to have good 71 72 taillight and back-up housings (w/ pigtails). Need both sides. If so, could you please tell me price + ship to 15458. Some pics...possible?

 

Hey Scott,

I know i should have probably thought of this before my control arms were shipped out. But how much are a pair of clean hood louvers these days? All the mounting tabs off mine are completely scrap. I was thinking of almost milling a set out of aluminum or something for the time being. I will realistically need the louvers for next spring.

Thanks,

-Tony

 

Do you have parts still available? I just started tearing down my car, and I would like to build it back properly. Basically, I need everything.

 

I do still have many many parts. Give me a call and we'll get some kind of list going?
Thanks.
Scott
C. 317-727-7041

 

Hey.

I'm interested in the beauty rings if they are for 15" rallys. I also see a ton of power switches. By any chance do you have any for 80's car? I have Aftermarket switches for my door locks and they suck, the orginals can be rebuilt.

Shipping to 19116?

 

Good Morning,
I was suggested t reach out to you by AllanR. I have a 71 convertible and am looking for a drivers side door. I am looking for something with no rust on the frame. Thanks.

Gerard

 

Redog,
I'll check on the beauty rings, but I think most of them are the 14" variety. I do have a ton of power window switches, but all of them are for '60s & '70s cars. I haven't started hoarding 80s stuff yet, but maybe it's time.

Bucky,
Allan is a great guy & I appreciate his referral. I have a few drivers doors, but none are real nice. All of them have rust at the rear bottom inside seam, or worse, sorry.

 

OK, let me know, Thanks

And the 80's B Bodies are getting hard to come by here in the Philly area. I had a guy send me a bunch of stuff from a Delta in an Indy Junkyard

 

I am looking for a 4 spoke sport steering wheel in good shape for my 71 . Would you by chance have one?
Thanks
John

 

Redog,
I just got some 15" trim rings, I'll try to get pix tomorrow?

John,
I have a couple sport wheels, I'll get pix of those also.

 

I have a friend wanting a no rust, no damage 72 Supreme convertible deck lid.

If you have, I can pick up in person sometime.

 

That would be great I appreciate it! thanks

 

I'm looking for one set of bucket seat rails if you have any for my 72 Cutlass. I'm convert from bench to bucket seats. Thanks

 

Koda,
My nicest conv. decklid had the individual OLDSMOBILE holes & all have been bondoed oveer. Not a huge deal. Has extra holes drilled for the 442 emblems, & has a tiny bit of rust under the bottom seam. I don't think he'd want it?

pfergy,
Let me check my seat track selection.

 

Looking for a black dashboard and bucket seat mounting brackets for my 70 cutlass. Pm sent

 

Do you happen to have a passenger side door mirror for a 67 Cutlass/442, and an original chrome air cleaner lid 67 442 4 speed?
Thanks
Steve

 

Gotcha, probably not. Thanks much.

 

Hi Scott,
How is the passenger side fender on the 69? I need that and the wheel opening molding.
Thanks, Carlos

 

Hi Scott, I've bought from you before and I can state the prices are fair and the parts are goo. I'm looking for a stock air cleaner assemble for a 4 bbl cutlass. I saw some pics and they look good. Do you have any and how much are you asking. Shipping would be to Detroit, 48202.

Joe

 

redog & John,
Working on your pix tomorrow maybe?

pfergy & 70 cutty,
Working on getting pix of the dash & seat tracks, stay tuned.

Steverw,
Here is a mirror from a '67 I believe? Not junk, but not nice. $20.00 shipped? No chrome lids, sorry.






Carlos,
Pass. fender has a large hole in the bottom, probably not worth messing with. No wheel well molding either, sorry.


Joe,
Here are a few, $65.00 shipped for a nice one?

 

I need a battery tray for a 71 350 2v.

 

72,
I don't have any nice ones right now, probably best to get a repro.

Redog,
Here are 4 15" trim rings, all of them have curb rash & a ding or two. Not real nice, but better than nothing. Let me know if you are interested.


John,
Here are a couple, missing the horn ring & horn button, but those can be had on ebay or through the aftermarket. Both need a good cleaning, but otherwise no major damage. $115.00 shipped for either one?

Pfergy,
Here are some bucket seat tracks. All need blasted or cleaned up, but no major rust. I have one complete pair & 2 inner tracks. $30.00 each piece or $55.00 for a pair plus shipping.

 

Scott is a great guy to do business with! Fast shipping and his price is always right. I use him often and highly recommend him.

 

Any 70-72 wagon interior pieces? In particular the piece that goes between back door and quarter glass for a vista. right side.