Mics Parts.. Edelbrock, Magnaflow, DMR
November 18th, 2013, 04:58 PM
#1
Registered User
Thread Starter
Join Date: Jul 2011
Posts: 488
Mics Parts.. Edelbrock, Magnaflow, DMR
I have The following items for sale, all very low mile parts!
Magnaflow 2-1/2 exhaust. This kit is Stainless and runs from the headers to the tailpipes. It has a 3" 3 bolt collector flange reduced to the 2-1/2" X pipe. It only has 531 miles and is in great shape with the exception of one of the tail pipes that turns out right behind the rear tire has about 3 inches cut off, it comes with 2 other magnaflow tail pipe kits that have never been installed. http://www.summitracing.com/search/b...rder=Ascending
Paid 615.00 plus frt.....350.00 plus you pay freight I will ship it any way you like that is feasible. EXHAUST HAS BEEN SOLD
Used water pump, worked excellent when removed, Personally I have no use for it, send me a 6 pack and the frt!
Accel Stainless plug wires and R & D Wire looms, the looms have been bent and one of the plastic wire holding blocks is busted, probably a 5 dollar fix but they still function fine. $30.00 plus frt
Edelbrock performer intake, has had some minor port work done, it has been drilled for a PCV valve. 80.00 plus frt SOLD
1) I have no idea what brand this is, this was the original cam (not original factory) that came in the 455 when I purchased it.
This cam is supposed to have 6000-8000 miles on it I am selling the cam & lifters. Numbers on the cam card are as follows:
GRIND # H2145 2172 12
CORE 1500001
INTAKE & EXHAUST LOBE SEPERATION 112.1
VALVE OVERLAP -6.5
INTAKE
VALVE OPEN .6 BTDC
CENTERLINE 107 ATDC
VALVE CLOSE 35.3
DURATION 215.9
LOBE LIFT .29453 IN
VALVE LIFT .47124 IN
LOBE AREA 22.66 IN DEG
EXHAUST
VALVE OPEN 45.4 BBDC
CENTERLINE 117 BTDC
VALVE CLOSE -7.2 ATDC
DURATION 218.2
LOBE LIFT .30193 IN
VALVE LIFT .48309 IN
LOBE AREA 23.19 IN DEG
MAKE AN OFFER
1) I also have the following cam that has 537 miles on it:
Cam is a custom grind by Cutlass EFI 228/236@.050, ground on a 110 with 4 degrees advance. Lift is .568 on both includes lifters.
MAKE AN OFFER
1) set of Dick Miller Racing pushrods, black in color, gold writing 3/8 x .083 9.80 .040 oil res.
I am not sure what these are worth, please make an offer!
IMG_20131118_192135_356_zpsa8a2570a.jpg
IMG_20131118_192124_872_zps7250e80c.jpg
IMG_20131118_192116_904_zpsf0db9bc7.jpg
IMG_20131118_191736_018_zpsd19a920e.jpg
IMG_20131118_191745_963_zps28aaa9a3.jpg
IMG_20131118_191719_009_zps973fca31.jpg
IMG_20131118_191710_590_zps0b9b9918.jpg
IMG_20131118_191651_644_zps94c1653d.jpg
IMG_20131118_191643_431_zps5940dfa4.jpg
IMG_20131014_233727_699_zpsafb98404.jpg
IMG_20131014_233416_365_zps1b587f54.jpg
IMG_20131014_233410_424_zps6e2798a4.jpg
IMG_20131014_233347_993_zps1a267831.jpg
IMG_20131014_233333_646_zpsfd8518e7.jpg
Magnaflow 2-1/2 exhaust. This kit is Stainless and runs from the headers to the tailpipes. It has a 3" 3 bolt collector flange reduced to the 2-1/2" X pipe. It only has 531 miles and is in great shape with the exception of one of the tail pipes that turns out right behind the rear tire has about 3 inches cut off, it comes with 2 other magnaflow tail pipe kits that have never been installed. http://www.summitracing.com/search/b...rder=Ascending
Paid 615.00 plus frt.....350.00 plus you pay freight I will ship it any way you like that is feasible. EXHAUST HAS BEEN SOLD
Used water pump, worked excellent when removed, Personally I have no use for it, send me a 6 pack and the frt!
Accel Stainless plug wires and R & D Wire looms, the looms have been bent and one of the plastic wire holding blocks is busted, probably a 5 dollar fix but they still function fine. $30.00 plus frt
Edelbrock performer intake, has had some minor port work done, it has been drilled for a PCV valve. 80.00 plus frt SOLD
1) I have no idea what brand this is, this was the original cam (not original factory) that came in the 455 when I purchased it.
This cam is supposed to have 6000-8000 miles on it I am selling the cam & lifters. Numbers on the cam card are as follows:
GRIND # H2145 2172 12
CORE 1500001
INTAKE & EXHAUST LOBE SEPERATION 112.1
VALVE OVERLAP -6.5
INTAKE
VALVE OPEN .6 BTDC
CENTERLINE 107 ATDC
VALVE CLOSE 35.3
DURATION 215.9
LOBE LIFT .29453 IN
VALVE LIFT .47124 IN
LOBE AREA 22.66 IN DEG
EXHAUST
VALVE OPEN 45.4 BBDC
CENTERLINE 117 BTDC
VALVE CLOSE -7.2 ATDC
DURATION 218.2
LOBE LIFT .30193 IN
VALVE LIFT .48309 IN
LOBE AREA 23.19 IN DEG
MAKE AN OFFER
1) I also have the following cam that has 537 miles on it:
Cam is a custom grind by Cutlass EFI 228/236@.050, ground on a 110 with 4 degrees advance. Lift is .568 on both includes lifters.
MAKE AN OFFER
1) set of Dick Miller Racing pushrods, black in color, gold writing 3/8 x .083 9.80 .040 oil res.
I am not sure what these are worth, please make an offer!
IMG_20131118_192135_356_zpsa8a2570a.jpg
IMG_20131118_192124_872_zps7250e80c.jpg
IMG_20131118_192116_904_zpsf0db9bc7.jpg
IMG_20131118_191736_018_zpsd19a920e.jpg
IMG_20131118_191745_963_zps28aaa9a3.jpg
IMG_20131118_191719_009_zps973fca31.jpg
IMG_20131118_191710_590_zps0b9b9918.jpg
IMG_20131118_191651_644_zps94c1653d.jpg
IMG_20131118_191643_431_zps5940dfa4.jpg
IMG_20131014_233727_699_zpsafb98404.jpg
IMG_20131014_233416_365_zps1b587f54.jpg
IMG_20131014_233410_424_zps6e2798a4.jpg
IMG_20131014_233347_993_zps1a267831.jpg
IMG_20131014_233333_646_zpsfd8518e7.jpg
Last edited by real57vetteguy; November 25th, 2013 at 11:34 AM.
December 6th, 2013, 03:15 PM
#7
Registered User
Join Date: Jun 2013
Posts: 492
I have The following items for sale, all very low mile parts!
Magnaflow 2-1/2 exhaust. This kit is Stainless and runs from the headers to the tailpipes. It has a 3" 3 bolt collector flange reduced to the 2-1/2" X pipe. It only has 531 miles and is in great shape with the exception of one of the tail pipes that turns out right behind the rear tire has about 3 inches cut off, it comes with 2 other magnaflow tail pipe kits that have never been installed. http://www.summitracing.com/search/b...rder=Ascending
Paid 615.00 plus frt.....350.00 plus you pay freight I will ship it any way you like that is feasible. EXHAUST HAS BEEN SOLD
Used water pump, worked excellent when removed, Personally I have no use for it, send me a 6 pack and the frt!
Accel Stainless plug wires and R & D Wire looms, the looms have been bent and one of the plastic wire holding blocks is busted, probably a 5 dollar fix but they still function fine. $30.00 plus frt
Edelbrock performer intake, has had some minor port work done, it has been drilled for a PCV valve. 80.00 plus frt SOLD
1) I have no idea what brand this is, this was the original cam (not original factory) that came in the 455 when I purchased it.
This cam is supposed to have 6000-8000 miles on it I am selling the cam & lifters. Numbers on the cam card are as follows:
GRIND # H2145 2172 12
CORE 1500001
INTAKE & EXHAUST LOBE SEPERATION 112.1
VALVE OVERLAP -6.5
INTAKE
VALVE OPEN .6 BTDC
CENTERLINE 107 ATDC
VALVE CLOSE 35.3
DURATION 215.9
LOBE LIFT .29453 IN
VALVE LIFT .47124 IN
LOBE AREA 22.66 IN DEG
EXHAUST
VALVE OPEN 45.4 BBDC
CENTERLINE 117 BTDC
VALVE CLOSE -7.2 ATDC
DURATION 218.2
LOBE LIFT .30193 IN
VALVE LIFT .48309 IN
LOBE AREA 23.19 IN DEG
MAKE AN OFFER
1) I also have the following cam that has 537 miles on it:
Cam is a custom grind by Cutlass EFI 228/236@.050, ground on a 110 with 4 degrees advance. Lift is .568 on both includes lifters.
MAKE AN OFFER
1) set of Dick Miller Racing pushrods, black in color, gold writing 3/8 x .083 9.80 .040 oil res.
I am not sure what these are worth, please make an offer!
Magnaflow 2-1/2 exhaust. This kit is Stainless and runs from the headers to the tailpipes. It has a 3" 3 bolt collector flange reduced to the 2-1/2" X pipe. It only has 531 miles and is in great shape with the exception of one of the tail pipes that turns out right behind the rear tire has about 3 inches cut off, it comes with 2 other magnaflow tail pipe kits that have never been installed. http://www.summitracing.com/search/b...rder=Ascending
Paid 615.00 plus frt.....350.00 plus you pay freight I will ship it any way you like that is feasible. EXHAUST HAS BEEN SOLD
Used water pump, worked excellent when removed, Personally I have no use for it, send me a 6 pack and the frt!
Accel Stainless plug wires and R & D Wire looms, the looms have been bent and one of the plastic wire holding blocks is busted, probably a 5 dollar fix but they still function fine. $30.00 plus frt
Edelbrock performer intake, has had some minor port work done, it has been drilled for a PCV valve. 80.00 plus frt SOLD
1) I have no idea what brand this is, this was the original cam (not original factory) that came in the 455 when I purchased it.
This cam is supposed to have 6000-8000 miles on it I am selling the cam & lifters. Numbers on the cam card are as follows:
GRIND # H2145 2172 12
CORE 1500001
INTAKE & EXHAUST LOBE SEPERATION 112.1
VALVE OVERLAP -6.5
INTAKE
VALVE OPEN .6 BTDC
CENTERLINE 107 ATDC
VALVE CLOSE 35.3
DURATION 215.9
LOBE LIFT .29453 IN
VALVE LIFT .47124 IN
LOBE AREA 22.66 IN DEG
EXHAUST
VALVE OPEN 45.4 BBDC
CENTERLINE 117 BTDC
VALVE CLOSE -7.2 ATDC
DURATION 218.2
LOBE LIFT .30193 IN
VALVE LIFT .48309 IN
LOBE AREA 23.19 IN DEG
MAKE AN OFFER
1) I also have the following cam that has 537 miles on it:
Cam is a custom grind by Cutlass EFI 228/236@.050, ground on a 110 with 4 degrees advance. Lift is .568 on both includes lifters.
MAKE AN OFFER
1) set of Dick Miller Racing pushrods, black in color, gold writing 3/8 x .083 9.80 .040 oil res.
I am not sure what these are worth, please make an offer!
Thread
Thread Starter
Forum
Replies
Last Post
coppercutlass
Racing and High Performance
36
September 21st, 2012 12:00 PM
