f-85

Im listing this for a friend. Engine is new and only run on the dyno Motor was built by Milan. $6500 FIRM no trades, no deals, no window shoppers. Email or call me 630 885 1101


.060 over 455 Olds 4.185 X 4.250 Wiesco pistons , Eagle rods Balanced and bluprinted

.921 ceramic lifters cam is 242 (Mopar lobe .904) 256 (Ford lobe .875) @ .050 lift is .607 intake 1.7 rocker and .575 exhaust 1.6 rocker 112 LSA in @ 110 Custom ground Bullet camshaft

Offy Porto Sonic intake , 850 HP Ultra Holley carb

10-1 compression Pump gas motor

C heads 2.10 X 1.72 valve size Harland sharp roller rocker Jomar stud girdle

Toro D block with .921 lifter bores

N crank

8qt pan

Oldsmobile script aluminum valve covers

Arp hardware

SFI balancer and flexplate

Pro Billet distributor

815Cutlass1972

This is a good deal for a engine that was built by a very respectable guy! Take the guess work out, time at machine shop and buy it.

oldsmobiledave

Bump for a fabulous deal.


OK all you CO cheapskates let me break this down for you.


468 cid = $13.88 / cubic inch


482 hp = $13.49 / HP


507 TQ = $12.82 / LB Ft


Any way you slice it you can not build performance for this sort of money. Add in that Milan pulled the wrenches on this & it is a no brainer.


If you want a BBO that will tear your fillings out then step out from behind your keyboard & step UP!


This is an honest $10000.00 engine for $6500.00 & if you snooze you lose.


Good Luck with the sale

f-85

Thanks guys. Yeah its a steal. I know he is not making a dime selling it. Im sure if you wanted this motor built that it would cost about $9000-$10000

70cutty

Damn…that is a steal.

f-85

I can also crate and ship this motor to your door.

f-85

Still have it. Im surprised no has jumped on this.

71 Cutlass Ragtop

PM sent

f-85

PM replied

69ishHoliday

I keep coming back to this page because I know the engine is worth the money!

61reoldsman

I'm sure it's a smoking hot deal but probably like most of us cheapskates money is tight and a $6500 engine is just a little out of the budget .Good luck though .

oldsmobiledave

It is NOT a $6500 engine. It is a $10,000.00 engine for $6500.00.


bump for a great engine at a give away price.

f-85

Thanks Dave. I dont think alot of people know what it takes to build a good motor. Here is a (aluminum head) 455 on ebay. Has Cheap pistons, stock rods, just a cheap build with aluminum heads. I bet doesnt make more then 400hp $7000 http://www.ebay.com/itm/OLDSMOBILE-4...47a066&vxp=mtr

Zach W.

Can't go wrong with motor and price. Running a 468 BBO in my 65 starfire smaller cam higher compression. If I had a project car I'd jump on this deal. Makes me want to find a 442 roller.

chadman

Pretty much sums it up. For those of you not familiar with Milan he is well respected in the Olds powered racing circle. You could drop this in a stock weight A body and run mid 11's all day long.

f-85

Ttt

oldsmobiledave

I am confused. How can this STILL be for sale?


Must be an April Fools' Joke because this is a deal of a lifetime on this engine.


Bump for a great deal. Seriously guys if you are considering building an engine buy this one instead.

f-85

Yeah im really surprised too that it sat for sale this long.

Professur

I think they're afraid of it.

rootney

This is a curiosity question as I have
just finished a similar build, and I agree the asking price is very good.

The HP number would suggest the heads have been ported extensively.
Yes?


George

f-85

No, no port work at all. The power comes from the larger valves and the custom ground cam.

f-85

Here is a thread on ROP talking about the build.

http://realoldspower.prophpbb.com/topic2913.html

rootney

Pretty cool.
It's gonna be a fast ride when somebody picks it up.

George

smash72

Wish I could only paid 5K for my whole car and now I live in it.

Just kiddin this time next year it's what I'm looking for, good luck.

f-85

Still have it. Lots of window shoppers and people that want even a better deal. But no one serious.

f-85

TTT


StockChead_zps1cf79e38.jpg

drjr56

Kills me I spent 9 grand on one....and this one is still for sale!!!! I would have bought it in a heartbeat off this builder!!

f-85

And on top of it all, this motor was built strong enough to handle more power. So if someone wanted they could get the heads ported or get some CNC edelbrocks and make more power. Or even spray it some. This motor is well built!

davebw31

Interested. Cost to ship to 32327? Estimated ET s in a 3650# w/driver, Turbo Action turbo 400 w/JW 9" 3400 stall (flashes to 3,900), 4:10 Moser 12 bolt rear and 29.5X10.50X15 Mickeys. Currently runs 7:02 ETs @ 97 mph in the 1/8 with current engine and I shift 1-2 @ 5900 rpm and 2-3 @ 5700 rpm. It is a 461 cu 1970 block making 459 HP and 479 torque, solid lifter Bullet cam about same spec as yours 4* advanced, 850 HP Ultra carb. with one inch spacer on a ported Edelbrock RPM manifold , Harland Sharp 1:6 #5001 rollers, ported "E" heads with smaller valves than yours - 2.02 intakes and 1.680 exhaust.

Know it may be hard to advise on ETS with info I provided. It seems that this set-up is a step up. Want to run 6:80'ish in 1/8 so I can be competitive in the heads-up 7.00 class which is very big here in Florida. Have CASH in hand!

Understand this engine can make more power with other options ($$$), which I am not interested in doing.

f-85

Hey Dave


Honestly im not qualified to make an accurate estimation for ET. But as you said giving the dyno numbers this is a step up. Also keep in mind we only made maybe 5 passes on the dyno. We didnt do everything we could to try and get the most power out of it. So im sure with minor tweeking you can still get a few more ponies out of it. Quote shipped to a residence to that zip would be $436 or $386 if you pick it up at a terminal in Tallahassee. But it would be an additional $100 for me to build a solid crate for shipping. Thanks for your interest.


Josh

drjr56

I agree with Chadman...3650lbs,and the right setup mid 11's is
very possible with this motor!

davebw31

Hmmmm, I am already running 11:20 s ET s in the 1/4!!!!!!!!!! Mostly 1/8 mile tracks near me, so looks like I will go with more gear in my spare 12 bolt Moser rear end and swap out the 4:10 for a 4:56 or 4:88.

Thanks f-85 for your response.

f-85

Hey Dave


I think thats a good choice. I hope you reach your goal of 6.80s.


Josh

Dave Siltman

By any chance, has the crank been machined for a stick? And, have you gotten any shipping quotes to other states? I'm in Maryland zone 21152.

f-85

Hey Dave

Yes it does and its internal balanced. Shipping would be between $250-$450 to your area. Thanks


Josh

f-85

Still for sale....

Professur

I'll be honest ... if I didn't let my daughter drive my car from time to time, I'd rent a pickup and swing by just to keep it in reserve at that price. I don't even want to consider what she'd do with that much under her little right foot.

f-85

Well maybe its time to buy another Olds

f-85

Well i still have it. Lots of window shoppers, no serious buyers.

Professur

I have considered maybe dropping this in place of the Bowtie 305 in the Parisienne ... 482hp backed with a freshly rebuilt th-200c. How far do you think the pieces would fly?

Maybe you need to do what GM did and under rate the horsepower.