Gerald Nickels

Cutting up my 65 Cutlass for parts to sell. Have a great pass. side door with glass and pass. side 1/4 bottom and back panel no rust a Fremont, Ca. car. Have no air parts and a 307 with 350 trans in working order to sell. Firewall no rust and if picked up in Nor Cal will help me as I don't like shipping big parts as our Fastenal will not ship big parts. if I can get it into a box that helps me out. Will have a 65 rear end and drums in front to sell also. Not asking lots of money just need it gone if you want the whole car ask. No glass front or rear but rest is here.
Door $100 + shipping
rear 1/4 bottoms both sides $100 each + shipping. can ship both $160 + shipping.
Firewall $200 OBO.
seat back 2 door HT. no buckets
dash $50 + shipping 64-65 both years.
roof is cut up in back but front is good. make odder

Bfg

How much for the black antenna nut?

dadedave

rear 1/4 bottoms. what are the dimensions of the pieces that are cut out?
Are the side trim pieces for sale and if so how much? I need the wheel trim and the rear pieces at the least.
I also need the steel body rear panel for the tail light section area.

docsteen

Gerald -

Email parts request sent.

docsteen

miksan

need rear tail section, how's the metal pieces that hold the rubber to the trunk.

Chugger

interested in the dash. any cracks ?

Gerald Nickels

Dash pad and glove box door I'm keeping that's why I bought the car for $1500, new interior. Any other parts needed ?
Gerald

Daniel Alborn

I might like the driver's a pillar, reverse lights and wiring, and does the car have a quadrajet or 4jet?

Gerald Nickels

I too am looking for back light housings. I do have the A pillar both sides. Might need a pic showing what you need.
gnickels@rocketmail.com

Gregory Krupp

Do you still have 1/4 panels for rear. I have been on hunt for some time

Gregory Krupp

Are you letting go of chrome side molding. I live in NY and mine are in rough shape

BigHen

are you letting the side moldings go and if so $?
Is dash column or floor shift dash & $?
Interested in the rear quarter lowers, if not already cut out, would like full driver side rear quarter if not damaged & $?
Are you letting the front/rear windshield moldings go and $?

Gerald Nickels

Inside of 1/4 have has holes where they pulled it out and put mud on the outside. I have front moldings and some side moldings. The back panel is good no rust and cawl if rust free no air. Have 65 fenders and 6 bumpers 3 front and 3 back. I need 65 back up lights.
Gerald

Gregory Krupp

Would like to get 1/4 from you and any body moldings as I was going to delete them . Can you email address so I can send $ before they disappear.

Bernhard

It looks to nice to cut apart whats wrong with the car that it has to be cut up?

Gerald Nickels

Its all ready being cut up. The 1/4 are toast and look good out side but inside are bad too much bondo. The A pillars are great no rust. Trunk floor and inside front floor is cut up. Back seat area is rust free.

Bgdaddy455

Do you know what rearend is in it? Posi, gear ratio?

Gerald Nickels

I have two 65 Cutlass rear ends. One is out of car. Both auto cars.

Bgdaddy455

are either posi (lsd) and do you know the gear ratio?

Gerald Nickels

No posi. gears ?

San Fernando Olds

I need a nice hood center spear for a 65.

ankerclanker

rear panel(between trunk lid and bumper, I don't know what else to call it)

ted

Gerald Nickels

Yes I have the back panel. I need pics showing where to cut.
Gerald
gnickels@rocketmail.com

ankerclanker

I didn't explain what I needed well enough. I need the chrome/pot metal dress up piece that goes across the back of the car, under the trunk lid and above the bumper area
ted

JATA

What you are looking for is the chrome filler or detail panel that mounts between the tail lights. It has the rocked emblem in the center and will either have an F85, Cutlass, or 442 script on the pass side. It is one large pot metal piece or possibly could be just the two center bars depending on the car you need it for.

ankerclanker

yessir, that's what I need. Do you have a good one? if so, How much? thanks for the description help

ted

ankerclanker

well, that proves I should have had a cup of coffee or two, before jumping on here, realized after posting that you are not the person cutting up the 65. so now that I have finished that 1st cup, eyes open, brain cells starting to fire off, does anyone have one?

americosamma

[Hello,
Do you carry the full instrument panel?regards.
AmericoQUOTE=ankerclanker;1118705]well, that proves I should have had a cup of coffee or two, before jumping on here, realized after posting that you are not the person cutting up the 65. so now that I have finished that 1st cup, eyes open, brain cells starting to fire off, does anyone have one?[/QUOTE]

americosamma

[Hello,
Do you carry the full instrument panel?regards.

Rvsmith5

Does it have a center console?

Thanks,
Bob

americosamma

Yes, it has the center console.

Rvsmith5

sent a PM

Gerald Nickels

All interior is mine no parts inside. But I have 4 bumpers to sell. Two I'm keeping. My sawall is not working right now must get a new one soon. The car was hit on the driver side and door, frame toast. Have drums front and rear./ pass door was not hit and have a good dash no pads and rear panel between tail lights. No back panel that everybody wants sorry. Have side moldings not sure if full set or not. My health is been up and down but good right now. No cancer but Kidneys not good.
Gerald

Rvsmith5

Sorry to hear Gerald.