Outlaw, all I have are two driver side units
that were used for patches. One still has
the thin chrome wheel well strip if you can use that.

 

hello i have a 71 cutlass s i need the blower motor switch auto floor console misc parts, i.e where the light bulb sits to light up the shifter control panel.


thanks a bunch

 

Tru-blue,
I am looking for the left rear quarter panel trim (3/4") for a 1972 Cutlass Supreme Convertible. Thank you

 

Todd,

I believe you could be mistaken on it being only 70. I had a 72 one owner car years ago that had them. I have a set now on my 67 I believe they were 70-72.

 

Bump.

 

Here ya go Joe.

 

I cleaned up this fan shroud,
turned out very nice.
The part # on it is 407895 2.
I has the flat lower mounts, not upturned like a 69-70.
I would like to get $100 plus shipping
within the states. I have a lot of other
nick nacks, and smaller things that I want
out of the shop. I do that, I can get
back to work on the 69. I hope...

If anyone needs something,
let me know and I will post some
pics if I have it. Thanks.

 

looking for a cutlass S hood for my 69?

 

It left last month.
Right now all I have is a 70 Supreme hood
and a rust free 67 Supreme hood.
Thanks for checking with me though.
If anyone needs pics or prices on anything,
shoot me a pm.

 

if chad dosen't go for the 1970 fender i would be interested
thanks ray

 

Sorry Ray, sold that one sometime back.

 

It has been a while since I have posted
on this thread.
My priorties have changed, with the purchase
of a 66 442 vert. I need to move a lot of these
parts that I have horded over the years.
I am wanting to downsize as it were, and am
going to sell my 70 Supreme beater. And as soon
as I can tell exactly where everything is on my
69 442 resto project, I am going to offer that one
up as well.

Let me know what you are looking for, and I will
see if I have it, shoot you some pics, and see
if we can make a deal. Thanks to all of you who
have purchased in the past too, Adam.

 

Do you have the wire harness or pig tail for a 70 cutlass factory radio?

 

Do you have inner tail light lenses for '72 cutlass?

Thanks,

Robert

 

Hey:
You should jump on that unit, a complete setup for $300.00 is a Great Deal, it took a few months for me to find one complete, Adam is a good guy to deal w/ as well.
Thanks Ron

 

x2

 

Looking for an A/C 68 Cutlass dash?

 

Thanks Ron & Ted, I appriciate the thumbs up!
I also must apologise to you guys looking for
parts as well. I haven't been online all week.
It has been stupid busy around here since last week.

With all the window work we have going on and
trying to get the garage ready for the 66 vert, I
had to get a friend to help me with a 8X12 storage
building that should be completed after I get home with
the car tomorrow afternoon.

Looking forward to meeting Eric in Granbury and
maybe get a pic with both his Cutlass and my new 442!

I will get to looking through the stock this weekend
for you fellows that have sent me pm's on parts, and
will return those pm's...I promise.

 

looking for the metal piece inside the steering wheel that you press on to activate the horn. It is covered with rubber inside the spoke of the stock 1968 Cutlass steering wheel. I need one of them as I have a broken one and it looks like pot metal...not fun to weld. Please let me know if you have one for sale. Thanks a lot ....Todd

 

I have an extra 69 dash, but I think
there are minute differences between the two.
Please advise, Adam.

 

Hi Todd.
I have 2 old Cutlass steering wheels.
I will check to see if they have what you need this
weekend, and shoot you some pics, Adam.

 

Hi Robert.
I know I have some outer lenses for a 71.
I will check this weekend for the inners
and let you know, Adam.

 

Ely, I might, it will take some digging.
I should be able to let you know this
weekend sometime, Adam.

 

Thanks Adam you Rock, I also need the inside door post trim on the passenger side for my 1968 post cutlass S that goes between passenger door and the back quarter window. Let me know if you have this piece as well. Thanks again ....Todd

 

Hi, any chance you have a good rear bumper for a 67 442?

 

Sent PM to you.

 

Sent PM to you on Dash

 

Which one is the 69 S hood? Might be able to help you out but i am not a pro at what hood is which by any means

 

If he is not interested can you send me some pictures of the dash, looking for a vented one for the H/O

 

Tom, the dash is a black a/c dash
that was VERY nice untill I stored it
wrong. It now has a nice crack on top
in the middle. I believe an easy fix.
I was hoping to get $275 for it.
Weton get first crack if he wants it.
I will post some pics, A.

 

Steve I have one, but it's a core.
I think they are the same as a Cutlass
bumper as well, yes?

 

Here are some pics of the black
69 a/c dash for a 442 or Cutlass.

 

Todd, I wasn't sure what you needed...
Here is what I have. Let me know and Thanks, A.
I also checked on the post car stuff, no luck.

 

On the 1st steering wheel pic you'll notice the steel pieces inside the left and right spoke which activate the horn. I need one of those.....Thanks ....Todd

 

Bob, I found three.
One of the larger ones is missing.
I found 2 sets of outers for the
71's though, go figure. $20 + ship.
Thanks and let me know, A.

 

 

Adam,

I will pass on the dash. Thanks for your reply.

 

No problem wyteon.
Tom, (Sicky Olds), did you
need this dash?

 

I can do that Todd.
Are they interchangable from left to right?
Let me get the side you need for sure.

 

Adam there are two that are the same they are the ones in the left and right spokes of the steering wheel where the long push buttons go inside the spokes for the horn. I need one of those, either side will do as they are the same. The metal piece should have a rectangular cut out in it. If you take one of your steering wheels apart and look inside the spoke horn mechanism you'll see what I am talking about. Thanks .....Todd