Do you have headlight housing assembly for 70 Cutlass?

 

Hi J. I only have a driver side.
Not in the greatest shape, but I can send
you a pic if wanted. just need an e-mail address.

 

Hi--need a front bench seat, rubbers, and a/c ducting.

 

Hi Capt. and welcome.
I don't have a seat. Not sure what rubbers you need.
I am looking at a deal on a 72 for some interior pieces
for my 70. It has buckets though. But I belive it is an a/c car.
When I get a chance to check it out, I will look and see if the
ductwork is still in place.

You may try John, 2blu442, he has a lot of goodstuff too.
Actually there are several fellas here that have things.
Begin a new thread under 'Parts Needed.' You may get
a quick response from some of the guys.

 

Thank you. Doors and trunk weatherstripping. The guy put new weatherstripping on the car, but I believe it's the wrong size as the doors are difficult to close; in fact, if you shut the door slowly, it just springs back toward you when it gets about 3 inches from closing.

 

Adam that is great thank you. Any idea how much shipping will be to El Paso Texas 79936. Please let me know as I would like to get these 2 pieces asap. Thanks again .....Todd

 

Think I need passenger side only
I'll dig em out this week to check for sure
They're stashed away while waiting for body work
To be done

 

 

John.Clingerman@insightbb.com

 

These are still available if anyone needs them.
I also found a driver side cutlass grille for a 69,
it is nice with all mounting holes intact, $40 + ship.
Also found a set of 69 headlight housings, fair shape, $75.

 

Check out Austin Tx Cl Parts under Olds Oldsmobile for some
of my stuff from Marble Falls. Thanks for looking and helping
me get my project finished. All it takes is $$$, right?

 

Bump.

 

Hey Tru-Blue,
Looking for a decent steering wheel for a 68 Cutlass, if you have one, please send photos and price.
Thanks,
Doug

 

Hi Doug. I have two, but they are crap, sorry.
The horn buttons are nice though. 1 red, 1 green.

 

I know most of them have cracks on the outer ring which can be repaired and will be ok as long as the spokes are in decent shape. Let me know where the cracks are if that is what is wrong with them,
Thanks,
Doug

 

Doug, send me your e-mail, I will send you some pics, Adam.

 

d.bevill@comcast.net

 

Doug, pics sent.

 

need some rear 1/4 window fuzzies inner and outer for a 68-69 hardtop. can you help me out?

 

Hi Fizzy. I found a new set of PUI's for the rear qrt. glass,
all four for both sides.
They have the rounded bead.
But I think they maybe for the convertable.
Their overall length is 20 inches.
I belive the 68 also had the clip on type with
two screws on either end as well.
Maybe someone will chime in to let us know
if they are indeed for the vert, I don't know for sure.

 

I am looking for a valve cover breather element for my 66 442 4spd.






Thanks

 

Chuck all I have is a nos Wix air breather element.
Wix # 095, supercedes Wix 42095.

 

By chance do you have any rear quarters(Partial) with good metal for 71 Cutlass S? I only need around the wheel well and the bottom part at the rear of car and up a few inches. They don't seem to make a patch panel for the rear of the 71 "S", only full quarters.

I also need fuzzies for the same car 71 S hardtop non post.

 

Hello, i am new to the this forum....Thanks for allowing me to join. I have a 1970 custlass supreme that i am looking for a front bumper....do u guys no were i cget a good used one from? thanks in advance

 

Hi,

If you still have the wheel well mouldings for the 66 I am interested. I also need a fuse panel and battery tray and the hardware that goes with it.

What 66 2 door interior pieces do you have left.

Cheers,

Rob

 

Hi C. I don't have any of these parts right now.
Create a post in the parts wanted section, and you
will have better luck. Thanks for checking with me, Adam.

 

Hello, and welcome to the forum.
As stated above, begin a thread in
the parts wanted section.
I have one, but it is bent.
I hate to scrap it if someone could
use it though, let me know and thanks, Adam.

 

Rob, I do have the wheel well moldings for
the 66. I have a fuse box for a 67 with air
if that will help at all. Send me your e-mail
address. I will send you some pics, thanks, Adam.

 

ok...thanks...i will do that....i would like one that is not bent but thanks man...

 

No Problem dude!

 

Bump.

 

ttt

 

The 69 442 grills have been sold
along with the 12 bolt rear.
Thanks guys!

 

I posted some pics of a floor shift
tilt steering column I have up for
sale on Austin TX CL. 73-79?
This one will need a little work,
but it has the cruise as well, $200.

 

Bump.

 

Any seats for a 66 olds 442. Also driver side panel, front bumper and window trim, or interior chrome peices without pitting

 

Right now all I have is a set of trim
for the back glass. I will have to check
on the front windshield pieces.
Did you need both?

 

Looking for the a/c firewall box (really just the half that is towards the driver's side).

 

I'm looking for a 1972 Cutlass (Black) with wood grain glove box door.
Thanks Barb.

 

Send me your e-mail, I will send on some pics.
Thanks, Adam.