Clearing out Olds Engine Parts
#1
Clearing out Olds Engine Parts
I am clearing out the reminder of all my BBO/misc. engine parts as I no longer need any of this stuff. All prices INCLUDE shipping to the lower 48 states. Alaska, Hawaii, and Canada will be actual cost via UPS, FEDEX, or USPS, whatever is least expensive. Here’s what’s left:
- Eagle ESP H-Beam Rods – Eagle part number CRS673503D - Stock length 6.735 inch rods – All rods resized ready to run. Excellent condition. - $275
- ’68-’69 400 Ross Flat Top .040 Forged Pistons w/floating pins and double spiro locks – stock pin height. Piston/Pin approx weight 532g/147g - $385
- ‘65-’67 400 Kenne Bell .030 Dome Forged Pistons w/valve reliefs. I do not have the exact specs on the dome height (it’s small). Stock pin height, press fit pin. Piston/Pin approx weight 549g/143g. Excellent condition - $385
- Mondello 4 Cap Main Girdle w/studs. Girdle was modified by previous owner to fit whatever oil pan he was running. Have pics to show where they clearanced girdle by contouring edges. - $165
- 5 Cap Billet main girdle. I believe this to be an older DMR piece. $165
- ARP Big Block Main Stud Kit, 185-5401, NEW, only removed plastic to check contents - $70
- ARP 7/16 6pt Head Bolt Kit, 180-3600, this was an open buy box from years ago. Box is in horrible condition, there is no lubricant or instructions and one washer is missing, but they are NEW and have never been used. - $50
- Nice used Lunati Bracket II Master Camshaft w/lifters – Hydraulic Flat Tappet- Kit number 10420483LK
Duration @ .050 (Int/Exh) 224/234, Lift (Int/Exh) .496/.520, LC – 112 - $100
- Older Engle Hydraulic Roller Camshaft, cam only NO lifters - duration @ .050 (int/exh) .243int/.257ex, lift (int/exh) .552/.537, LC - 113 - $100
Pics are available for those interested. Again, all prices INCLUDE shipping to the lower 48 states. All interested parties can e-mail bponti442@aol.com or call/text 501-454-4947. These are the two best ways to get a hold of me as I don't check PMs very often. Any Florida locals are more than welcome to swing by and take a look.
- Eagle ESP H-Beam Rods – Eagle part number CRS673503D - Stock length 6.735 inch rods – All rods resized ready to run. Excellent condition. - $275
- ’68-’69 400 Ross Flat Top .040 Forged Pistons w/floating pins and double spiro locks – stock pin height. Piston/Pin approx weight 532g/147g - $385
- ‘65-’67 400 Kenne Bell .030 Dome Forged Pistons w/valve reliefs. I do not have the exact specs on the dome height (it’s small). Stock pin height, press fit pin. Piston/Pin approx weight 549g/143g. Excellent condition - $385
- Mondello 4 Cap Main Girdle w/studs. Girdle was modified by previous owner to fit whatever oil pan he was running. Have pics to show where they clearanced girdle by contouring edges. - $165
- 5 Cap Billet main girdle. I believe this to be an older DMR piece. $165
- ARP Big Block Main Stud Kit, 185-5401, NEW, only removed plastic to check contents - $70
- ARP 7/16 6pt Head Bolt Kit, 180-3600, this was an open buy box from years ago. Box is in horrible condition, there is no lubricant or instructions and one washer is missing, but they are NEW and have never been used. - $50
- Nice used Lunati Bracket II Master Camshaft w/lifters – Hydraulic Flat Tappet- Kit number 10420483LK
Duration @ .050 (Int/Exh) 224/234, Lift (Int/Exh) .496/.520, LC – 112 - $100
- Older Engle Hydraulic Roller Camshaft, cam only NO lifters - duration @ .050 (int/exh) .243int/.257ex, lift (int/exh) .552/.537, LC - 113 - $100
Pics are available for those interested. Again, all prices INCLUDE shipping to the lower 48 states. All interested parties can e-mail bponti442@aol.com or call/text 501-454-4947. These are the two best ways to get a hold of me as I don't check PMs very often. Any Florida locals are more than welcome to swing by and take a look.
Thread
Thread Starter
Forum
Replies
Last Post
junkyard72
Parts For Sale
2
December 30th, 2013 07:16 PM
Vader
Parts For Sale
1
August 9th, 2012 08:29 PM