cam and lifters
#1
cam and lifters
This is a cam and lifter package from my 455 olds. There is less than 50 miles on them and they were properly broken in. You can see in the picture the lifters are labeled according to what lobe they go with. I have no use for them. I also have the push rods I used with the stock heads I will sell for another $30.
Here is what my cam sheet reads exactly:
CRNK DEG
Duration at .o5 in
Intake Rocker ration 1.6 in
Lash 22 24 25 hyd
Exhaust Rocker Ratio 1.6
Lash 23 24 25 hyd in
Install can on * * Below Cyl# 1
Intake & Exhaust
Lobe Seperation= 110 CAM DEG
Valve overlap= 8 Crank DEG
Intake
Valve open = 4.2 BTDC
* Centerline 108 ATDC
Valve Close= 41.2 ABDC
Duration 225.5 Crank Deg
Lobe lift= .30343 IN
Valve lift .48548 IN
lobe are= 23.87 IN * DEG
Exhaust
Valve open = 47.8 BBDC
Centerline 108 ATDC
Valve close = 3.8 ATDC
Duration 231.5 Crank DEG
lobe lift .30185 IN
Valve lift ..48296 IN
lobe area= 24.94IN * DEG
IMG_0271.jpg
IMG_0270.jpg[/quote]
Here is what my cam sheet reads exactly:
CRNK DEG
Duration at .o5 in
Intake Rocker ration 1.6 in
Lash 22 24 25 hyd
Exhaust Rocker Ratio 1.6
Lash 23 24 25 hyd in
Install can on * * Below Cyl# 1
Intake & Exhaust
Lobe Seperation= 110 CAM DEG
Valve overlap= 8 Crank DEG
Intake
Valve open = 4.2 BTDC
* Centerline 108 ATDC
Valve Close= 41.2 ABDC
Duration 225.5 Crank Deg
Lobe lift= .30343 IN
Valve lift .48548 IN
lobe are= 23.87 IN * DEG
Exhaust
Valve open = 47.8 BBDC
Centerline 108 ATDC
Valve close = 3.8 ATDC
Duration 231.5 Crank DEG
lobe lift .30185 IN
Valve lift ..48296 IN
lobe area= 24.94IN * DEG
IMG_0271.jpg
IMG_0270.jpg[/quote]
Thread
Thread Starter
Forum
Replies
Last Post
Stevec
Parts For Sale
10
February 8th, 2015 01:25 PM