This is a cam and lifter package from my 455 olds. There is less than 50 miles on them and they were properly broken in. You can see in the picture the lifters are labeled according to what lobe they go with. I have no use for them. I also have the push rods I used with the stock heads I will sell for another $30.

Here is what my cam sheet reads exactly:
CRNK DEG

Duration at .o5 in
Intake Rocker ration 1.6 in
Lash 22 24 25 hyd
Exhaust Rocker Ratio 1.6
Lash 23 24 25 hyd in

Install can on * * Below Cyl# 1
Intake & Exhaust
Lobe Seperation= 110 CAM DEG
Valve overlap= 8 Crank DEG
Intake
Valve open = 4.2 BTDC
* Centerline 108 ATDC
Valve Close= 41.2 ABDC
Duration 225.5 Crank Deg
Lobe lift= .30343 IN
Valve lift .48548 IN
lobe are= 23.87 IN * DEG
Exhaust
Valve open = 47.8 BBDC
Centerline 108 ATDC
Valve close = 3.8 ATDC
Duration 231.5 Crank DEG
lobe lift .30185 IN
Valve lift ..48296 IN
lobe area= 24.94IN * DEG

IMG_0271.jpg

IMG_0270.jpg[/quote]

 

What happened to your 455?

 

first time the heads leaked with no reason found. The second time the cam got ruined in 10 miles after being broke in properly. So now I am using a fuel injected LS1 motor and parting out what I had

 

still for sale make offers

 

________________any offers

 

__________________________________ttt