'79 BW ST-10 4 spd, $450
June 13th, 2011, 07:36 AM
#1
Registered User
Thread Starter
Join Date: Sep 2009
Location: Wisconsin
Posts: 315
'79 BW ST-10 4 spd, $450
This came with my '68 442 and is obviously not correct, last owner said it worked fine, I've not had it apart. I'd like $450 out of it and don't want to ship it. I believe it came out of a '79 Z28 or Vette. I had looked up the numbers and specs, but since lost the info, don't mind looking it up again if there is any interest.
June 23rd, 2011, 10:02 AM
#2
Registered User
Thread Starter
Join Date: Sep 2009
Location: Wisconsin
Posts: 315
3 rings on the input shaft, I have read conflicting info, but it is either a close ratio w/ 2.43 low or a wide ratio w/ a 2.64 low
26 spline input shaft
32 spline output shaft, same as a TH400
Main case part number is 13 04 065 903
build date is 3/23/79, from what I have read it is likely out of an '80 Z28, possibly a Corvette, no damage to the case, no weld marks on anything. Not interested in shipping.
Trades always considered, looking for 442 stuff from '66/'68
26 spline input shaft
32 spline output shaft, same as a TH400
Main case part number is 13 04 065 903
build date is 3/23/79, from what I have read it is likely out of an '80 Z28, possibly a Corvette, no damage to the case, no weld marks on anything. Not interested in shipping.
Trades always considered, looking for 442 stuff from '66/'68
Thread
Thread Starter
Forum
Replies
Last Post
2blu442
General Discussion
4
March 24th, 2013 09:47 AM
