When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
In need of a factory fan shroud for 67 442 that came on ac cars or h.d. cooling. The repops fiberglass have lousy reviews and am a bit leary on going that route. Also a radio delete plate non ac. Located in Pine Grove Pa. 17963 Thanks.
Last edited by jarcher442; Jul 27, 2019 at 05:05 PM.
Larry, Do you have the electrical contact parts for the horn buttons on a 67 Cutlass 442? I thought I had these but when I put the horn together, the ones I had weren't the right ones and don't fit. I think they're from a 68 now.
Fresh in #78 is a 70 Cutlass S, a parts car, two door hardtop, rough would be an upgrade to it's description. true 70 fenders that need the typical patch bottom lower section, have been sand blasted, car is a small block, column auto, bench seat car with AC. dash is good, glass is good, right quarter has lower rust issues, roof is solid, left quarter is decent. trunk floor is absent, (yea rusted gone) Core support is solid, No hood, or any of the core support stuff is there.
If its of any interest to anybody I have a 4bbl Quadrajet #7027157 good for a 400 or 425 with A.I.R. (smog) NOS in Rochester box. $400.00 Just a matter of changing the rods to make it non A.I.R.
I can do a 330 stock qjet intake as well as a Edelbrock aluminum intake As for carbs I am pretty sure I can do an original 330 qjet as well. It would be a 67. 67 is a one year only on the carb as is 66. The 66 was the first year or the qjet and it has some issues.
Some of the newer items I have for sale.
2-73-76 455 engines, J heads, runners with just higher miles, stick shift cranks $500 each as long blocks.
68 350 with #5 heads higher miles but a runner $350 as a long block
67 330 with #4 heads also higher miles but a runner $350 as a long block
65 330 high mile runner $350 as a long block
66 330 high mile runner $350 as a long block
78 403 high mile runner $400 as a long block
68 350 short block $200 high mile
66-67 Cutlass/442 hardtop/convertible doors
67 4 door sedan doors
67 F85 (no center spear or holes) very nice hood
Frames 65-66-67-70 (no convertible frames currently)
many other parts just ask
Toronado oil pans-3 ready to sell $100 a pan
71 Cutlass Supreme rolling shell with solid body most of the body work is done. Can sell as a package with one of the above motors, and a transmission, (not installed) but as a package, with motor of your choice a th350 trans, All should be rebuilt. $3500.
Also keep in mind we restore 66-67 dash instrument panels to show quality condition.
66-67 2 door quarter panels, have a few currently
66-67 fenders that need the typical lower back panel patch
64 fenders in very good shape
65 very nice hood
65 Starfire fenders, power window doors, quarters, power bucket seats, (the rest of the car is gone)
Fresh in parts car 70 Cutlass S 2 door hardtop,
All prices are picked up here. If you want shipped we can work that out. for additional money
Email or calls are best
541-815-4363 lemoldsnut@aol.com
Larry
Redmond, Oregon
Last edited by lemoldsnut; Nov 7, 2019 at 08:18 AM.
During some of my parts hunting this morning ran across some more parts to list here.
68 Cutlass/442 hood latch assembly
68 Cutlass Grill
68 Cutlass/442 deck lid (has a dent but very usable)
70-72 Cutlass S/ 442 wheel well moldings full set and some seperates
70 Cutlass S/442 trunk lid and quarter edge moldings full set of 3 pieces
70-72 AC dash black in very nice shape
Lots of 70-72 Cutlass S/ 442 glass
70 front fenders correct flat flange have been sand blasted and primered, needs some work but very usable
70-72 Cutlass S/442 2 door hardtop left quarter
70-72 Cutlass S/442 roof
70-72 Cutlass S/442 front and back window moldings
70-72 Cutlass S/442 hood rear molding
65 Cutlass/442 rear body panel trunk weatherstrip section
65 Cutlass/442 hood
67 F85 Hood very nice solid never had a hood spear
66-67 fenders (all need a heal patch)
66-67 quarters various conditions
66-67 2 door hardtop roof
66-67 firewall sections with or without AC
67 Core support.
66-67 Convertible/hardtop doors
66 Cutlass grill
65 Cutlass/442 grill
67 Cutlass grill bar
66 Cutlass/442 headlight bezels
67 Cutlass F85 headlight bezels and light assemblies with T3 lights
66-67 automatic throttle linkage
67 4 speed changeover this includes the following: (nice console, correct 4 speed 442 shifter, M20 large shaft transmission, transmission yoke, pedal assembly (67 only) but if you want for a 65 or 66 I can substitute that. Throttle linkage, bell crank and rods, bellhousing and inspection cover, flywheel for 68up engines, do not have a 64-67 flywheel, floor hump section This is a pretty complete changeover, All in good usable condition. $3250 plus shipping I would ship console separate so to protect it.
Just in a 71 Toronado parts car, will post some pics now and have a limited amount of info
Original engine:
455,
power door locks but not windows
AC
Tilt wheel
Cruise control
heated back glass
power disc brakes
arm rest bench seat (black interior)
Larry - I have a 67 Cutlass Supreme, I'm looking for the square style throttle linkage switch assembly. See pic. As you can see mine has broken. Do you have any of these?
Also, do you have the chrome (OLDSMOBILE) trunk lid trim, not pitted? Mine is somewhat pitted. I had it rechromed, but it still looks like it has water drops on it, from the chromed pits.
There was two suppilers for the Throttle kick down switch. One made it round one square. both operate the same. I can do either one.
Email me direct Lemoldsnut@aol.com
I just found a few 67 Cutlass Supreme/442 trim pieces. a RF wheel well molding $100 plus shipping
A few others like the front quarter pieces and some door pieces.
3-1967 Cutlass Supreme/442 hardtop
1- 1967 F85 4 door post
1-1967 Cutlass Supreme convertible (extremely rusty)
1-1965 F85 v-6 3 speed post car
1-1965 Cutlass V-8 automatic
1-1970 Cutlass S 2 door 350 AC automatic (extremely rusty)
1-1971 Toronado all original been parked in a blackberry patch about 30 years
1-1971 Cutlass Supreme very nice rolling body and chassis, make a great restoration project.
1-1968 Cutlass 4 door post hit all over 350 AC car
1-1965 Starfire mostly just body parts left, had been parked under a tree for about 35 years chassis and drivetrain all gone
1-1966 Cutlass 2 door hardtop, mostly parted out 330 column auto car
In addition to this I have a 40 x 40 shop that I have been filling with Olds parts for years. If you don't see it ask.
Larry
Redmond, Oregon
DIRECT EMAIL OR CALLS IS BEST lemoldsnut@aol.com
541-815-4363
Fresh parts car in,
67 Cutlass Supreme 2 door hardtop
Was a turnpike cruiser
Good usable bucket seats correct 67 with metal backs and bottoms black tracks included $600 plus shipping
many good body parts
Black interior left door panel not so good
deluxe seat belts
All the trim in pretty nice
Plus I have several other parts cars and parts just ask
It is always best to email direct or call. lemoldsnut@aol.com
541-815-4363
Larry
2 more parts cars in. Both 66 F85 4 door post cars. both had 6 cyl 3 speed on the column. one had been converted to floor shift so the column has a smooth collar now but is still a 3 speed column, have good fenders,, bumpers, hoods, one is a 66 smooth as a 442 hood, one had drivetrain one does not, many parts just ask.
66- 442 hood $600
Fenders vary based on condition $250-$350 each
Bumpers Very nice front $450, Rear $200 very good core
Great core support $350
Good inner fenders not rusted
all plus shipping
AGAIN contact me direct at lemoldsnut@aol.com for more info or questions
ALWAYS BEST TO EMAIL DIRECT TO: lemoldsnut@aol.com
or call 541-815-4363
Larry
During some of my parts hunting this morning ran across some more parts to list here.
68 Cutlass/442 hood latch assembly
68 Cutlass Grill
68 Cutlass/442 deck lid (has a dent but very usable)
70-72 Cutlass S/ 442 wheel well moldings full set and some seperates
70 Cutlass S/442 trunk lid and quarter edge moldings full set of 3 pieces
70-72 AC dash black in very nice shape
Lots of 70-72 Cutlass S/ 442 glass
70 front fenders correct flat flange have been sand blasted and primered, needs some work but very usable
70-72 Cutlass S/442 2 door hardtop left quarter
70-72 Cutlass S/442 roof
70-72 Cutlass S/442 front and back window moldings
70-72 Cutlass S/442 hood rear molding
65 Cutlass/442 rear body panel trunk weatherstrip section
65 Cutlass/442 hood
67 F85 Hood very nice solid never had a hood spear
66-67 fenders (all need a heal patch)
66-67 quarters various conditions
66-67 2 door hardtop roof
66-67 firewall sections with or without AC
67 Core support.
66-67 Convertible/hardtop doors
66 Cutlass grill
65 Cutlass/442 grill
67 Cutlass grill bar
66 Cutlass/442 headlight bezels
67 Cutlass F85 headlight bezels and light assemblies with T3 lights
66-67 automatic throttle linkage
67 4 speed changeover this includes the following: (nice console, correct 4 speed 442 shifter, M20 large shaft transmission, transmission yoke, pedal assembly (67 only) but if you want for a 65 or 66 I can substitute that. Throttle linkage, bell crank and rods, bellhousing and inspection cover, flywheel for 68up engines, do not have a 64-67 flywheel, floor hump section This is a pretty complete changeover, All in good usable condition. $3250 plus shipping I would ship console separate so to protect it.
Recently came in 67 bucket seats, drivers is power, they need reupholstered and drivers has no foam. Was removed to safely remove the seat.
$1000 plus shipping
A few recent items:
Restored 67 Dash Instrument panel- Price based on what you have for a core, and shipping location
very nice 66 442 hood bare (yes correct with no holes for center spear) $650
Very nice 70-72 front fenders $300 each (71-72 style)
Good core supports for 66- 67- 70-71 $300 each
68-69 400 engine, disassembled C heads and all, price is for each part or complete contact me with your needs
Have many heads, Ga,C, E, J, Ka, (No F or D)
many core engines that all were runners when pulled just higher mile, again ask
Have many other parts see lists in previous posts or email me your needs,
Always best to email or call and be specific what you need and your location.
Some recent parts that have come in
66-67 400 E block bare block with main caps, no ridge or cylinder scoring, SOLD
68-69 400 G block complete but apart, see no issues no crank, C heads no manifolds $650
67 442 hood, very nice rust free, solid SOLD
67 Bucket seats, drivers is power, very nice not rust buckets, need reupholstered, $1000
many taillights, back up lights, and small parts
front fenders 66-67 (no 66 only 442 fenders) $250-400 each
68 Bucket seats sold
67 Cutlass Hood $350
66 442 hood sold
66-67 trunk lids $200
67 hood lip moldings $200
67 trunk molding SOLD
all parts are plus shipping and body parts do not come with any trim moldings
all used parts are sold as is. I will provide as many pictures as you want from any angle of the parts.
I am in the middle of restoring a 67 rally pac dash panel, I also have the used rally pac that will sell with it, complete including the plug in. Get with me direct about this.SOLD
67 dash instrument panel restored ready to go, have a few more in the process. SOLD
Can also restore yours if a good core. check with me. I can fix lots of issues.
Best to email direct or call
Larry lemoldsnut@aol.com
541-815-4363
Redmond, Oregon
Last edited by lemoldsnut; Jan 25, 2023 at 02:40 PM.
