I m looking for 1967 cutlass supreme outside trim.

 

What pieces are you looking for? I have some but not a full set. best to email me direct at lemoldsnut@aol.com Thanks Larry

 

pm sent

 

Thanks

 

hi I'm still looking for the center ac vent in the dashboard for a 66 or 67 cutlass do u have one?...thanks gary

 

hi do u have the ac vent in the center of the dashboard?....thanks

 

No AC center vent at this time. Redoing a 67 with AC myself so waiting on any vent stuff selling till after I am done in case I need them.

Thanks
Larry

 

Not to sure if I have asked this to you but do you happen to have a usable crank I can slap in my 350

 

No I don't think you have contacted me before. I do have a nice 330 crank. Considered to be the best small block cranks ever. $150 plus shipping.

Thanks
Larry
Best to contact me direct at lemoldsnut@aol.com

 

do you have pieces some for a 67 cutlass supreme/442. the ones i am looking for are the a/c distributor duct, a windshield defrost duct, rear wheel well driver side molding.
thanks

 

do you have pieces some for a 67 cutlass supreme/442. the ones i am looking for are the a/c distributor duct, a windshield defrost duct, rear wheel well driver side molding.
thanks

Yes on the windshield defroster duct, no on the main ac duct, I am pretty sure I have a left wheel well molding. Will check in the morning just got home and spent from a trip.

email direct at
lemoldsnut@aol.com
Thanks
Larry

 

Heads: C B K G E and a rebuilt set of 403 heads
rebuildable 403 intake to pan
several 330 parts
67 425
various suspension parts
67 bucket seats to be restored
66 dash inserts in nice shape
66 black rear interior trip parts Hardtop
66 442/Cutlass front bumper
66 very nice hood
64-66 B body tilt column shift column


complete 66 Cutlass nose,

69 442 intake-carb set up 253 4speed carb
a 69 400 g block short block or could make complete engine less exhaust manifolds

67 convertible rust free frame. horns need a little straightening. but totally rust free.

nice sand blasted, painted with front end rebuilt 66 442 frame never rusted
several 66-67 hardtop doors
set of post doors
very nice 66 Cutlass hood

Lots of 66-67 parts email you needs but do it direct as I can not answer on here unless I log onto the laptop. can answer on other with phone.

lemoldsnut@aol.com
Thanks
Larry
or call between 8 am and 8 pm west coast time 541-815-4363

 

any steel wheels 14x6?

 

Have a 67 Cutlass Supreme Convertible that needs a left rear quarter.
The fender is on the car but in pretty bad shape.

If i can find the rear quarter or the back half that will work too.

Thank you for your help
Frank

 

Frank

yes I do email me direct or call

lemoldsnut@aol.com

calls 8 am to 8 pm west coast time 541-815-4363

Thanks
Larry

 

How much for a pair of 66 bucket seats..

 

The pair of 66 Bucket seats I have are true 66 Bucket seats. Those are one year only seats. The set I have needs to be recovered as expected. They are great cores to do that. The passenger seat is also the extremely rare recliner seat as well.

I would sell this set for $550 Plus shipping.

I just shipped a set of bucket seats to northern washington and they fit in boxes I had to buy that cost $10 for the pair. It cost $75 fedex to ship them above the $10 so to Northern Washington it was $85 total to ship them. I suspect that would be similar to Northern California.

I do take paypal. I do generate a invoice if you choose to go paypal.

Otherwise I would take a money order.

Thanks
Larry Moyer
3551 SW 34th ST
Redmond, OR 97756
541-815-4363 between 8 am and 8 pm

 

Could you take some pics of the seats other than the seat covers undersides for the track seat sides and backs... and PM them to me, I would appreciate that.... Bill

 

Sent you an email but wanted to ask if you have a nice trunk floor in a parts car.

Matt

 

Thanks Matt,

Returned email.

Larry

 

A few items to add to the list of parts:

2 door hardtop power window regulators (set of 4)
Several doors 2 door hardtop and 2 door post
frames 66 and 67
quarter panels
66-67 fenders
66 442 only left fender
trunk lids
a very nice 66 Cutlass hood
66 and 67 core supports
67 supreme trim moldings
67 bucket seats
66 bucket seats
67 no arm rest bench seat
back seat two door hard top and one convertible back seat
glass 2 door hardtop and convertible
a few 3:08 rearends 10 and 12 bolt style
some ac parts
66-67 choke coil
67 400 E block engine (to rebuild)
67 425 Toronado engine nice runner
66 qjet carb
67 330 4 barrel air cleaner


email direct for info

thanks
Larry
lemoldsnut@aol.com

 

Im looking for the latch and cylinder to keep the console hatch closed on a 65 olds f85 convertible automatic.

 

I very much doubt it but will look for you tomorrow. I haven't had any parts consoles. But you never know what I might have. Let you know tomorrow

 

Thank you

 

Do you have a half way decent rear bumper for the 67 you brought me this weeked?

 

I was sorting through some trim today. I have some 67 supreme 442 body side moldings. None of the small L shapped one and no wheel well moldings left. but have most of the others.

Email me direct at lemoldsnut@aol.com so I can respond much easier. Otherwise I have to wait until I am on the computer which may be a while.

what your needs are.

Thanks
Larry Moyer
Redmond, Oregon
calls west coast time 8 am to 8 pm 541-815-4363

 

ttt

 

Do you have a fan shroud for a 66 F85 and the parts to mount it? Ship to 91351.

 

Contact me direct at lemoldsnut@aol.com

I can do the brackets for the shroud but no shrouds.

 

Looking for a back seat for a 1969 cutlass convertible

 

That is a tough one. I have heard of people taking a hardtop seat and cutting it down to fit. Would mean taking some out of the center. I hear they get crazy prices for those in coverable condition,

 

We are finally getting the upstairs floor framed up in my shop. That, when finished will make a big difference for me. We are planning on taking a section of parts per day and getting them organized. I am so looking forward to being more organized. Will help me to find parts for you guys easier and maybe get an inventory list going. Well one step at a time. Will make a good winter project. Hopefully will make it so I can answer questions about what I have faster and more accurate.

Anyway if you have needs let me know and I will do my best to get back to you as fast as I can.

Always best to email direct at lemoldsnut@aol.com or calls between 8 am and 8 pm west coast time 541-815-4363 except Sunday then 1-6 pm

 

Clutch linkage for a '66 442. I have pedals and bellhousing with clutch fork. I need everything in between. I'll buy a Z bar frame mount since they are welded on.

 

No I don't doing my latest which is a 4 speed car as well and had to come up with some of it as well.

Thanks for asking

Larry

 

ttt

 

Larry,
Would you happen to have a good dash bezel on hand, and if so, would you be in for shipping it?


Tom

 

Yes sent you a pm,

Please email direct and give your location as well?

Thanks
Larry
lemoldsnut@aol.com
or call west coast time 8 am to 8 pm 541-815-4363

 

Some of the current parts: (not limited to this list just some I ran across today)
all parts subject to prior sale

Type O 12 bolt 3:08 open rear ends
71 10 bolt 2:73 rearend
67 10 bolt 2:78 rearend
66 10 bolt 3:08 rearend
66-67 4 barrel red air cleaner assembly
66-67 442 open element air cleaner top rechromed very nice parts
70-72 hardtop or convertible left door rot free
69 2 door hardtop or convertible right door rot free
66-67 2 door hardtop roof assembly
67 Cutlass Supreme bumper cores
66-67 front fenders
67 Cutlass Supreme hood extremely nice
67 Cutlass Supreme custom louvered hood, would be cool on a modified car
66-67 rear quarter panels
66 Bucket seat cores right one is a recliner
66-67 back seats
66-67 power window regulators 2 door
67 nice used dash insert
709253 69 442 4 speed carburetor
68-69 400 intake no cracks
69 455 core engine, I don't know anything about it just in a car I bought and does not run
67 330 320 horsepower very nice running engine
68 350 with #5 heads runs no knocks or rattles not much oil pressure
400G block can do as a short block or long block never had running no history on it bought and heads were off and pan off.
78 403 long block high miles
rebuilt 403 heads never been run in bags
big block heads: B, C,E,Ga, Ka, J
67 330 crank
330 engine parts
#4 heads
4 barrel 330 intake manifolds
66 67 frames
67 convertible frame
front and rear suspension parts, no boxed control arms or rear sway bars
manual and power steering gears

69 am-fm stereo, 8 track tested SOLD
69 98 power antenna
67 power bench seat
69 98 tilt telescopic wheel
68 Cutlass/442 floor shift steering column
68 Cutlass/442 steering wheel a few cracks
66-67 AC out vents
66-67 AC heater/ac boxes and evaporators
66 AC heater controls
67 AC heater controls
66-non-ac heater controls
67 non-ac heater controls
66-67 am radio
complete vacuum power trunk set up, (switch, reservoir, actuator, rod, floor protector, hose)

69 complete cruise control set up SOLD
69 deluxe blue seat belts
various 66-67 seat belts
66 rear arm rests and quarter trim panels for parts or used car applications
67 rear arm rest and quarter trim panels for parts or used car applications
66 front bumper fillers
67 front bumper filler
66-67 trunk lids
66-67 2 door post doors
66-67 2 door convertible and hardtop doors
66 stainless body trim
67 stainless body trim
67 taillights
66 taillights

66 power brake boosters
67 power brake boosters
some 66 and 67 wiring
some 66 67 fuse blocks


email direct for your needs is always best

I might be interested in trading for a few pieces myself, a 70-72 console 4 speed shifter, a 70-72 console auto or stick style, a O type 3:08 or 3:23 posi carrier, 70 white interior parts, a 66 tach dash mounted style

lemoldsnut@aol.com

Thanks
Larry
or call west coast time 8 am to 8 pm 541-815-4363

 

ttt

 

Wondering if you have any fenders,black cloth seats,steering wheel,the back panel on trunk,front bumper for the 67 or any complete cars you are selling.

Thanks