455 Venolia Pistons, 850 Demon Carb, Edelbrock 04B
#1
455 Venolia Pistons, 850 Demon Carb, Edelbrock 04B
As the title states, I am clearing out some BBO engine parts that have been sitting around for quite some time. All prices are before shipping. I have a nice used set of Venolia 455, .030 forged pistons. Light wear on the sides evident in the one pic. No cracks or heat damage. Pistons weigh 594 grams each and pins are 178 grams. Dish is approx 18cc. Ring lands are standard 5/64, 5/64, 3/16 and are standard press fit pin. They were designed to yield appoximately 9.5:1 on .039 gasket, .020 in the hole, with an 80 cc head; $275. Edelbrock 04B intake for square bore carb. No cracks or warpage and threads are nice. Decent flowing dual plane intake when hood clearance is an issue. Needs a good cleaning; $165. Barry Grant Speed Demon 850 carb. Ran very well on a 427 BBC. Primary fuel bowl has a corner piece missing out of it when previous owned dropped the fuel bowl while changing jets. Damage is clearly evident in last pic. Ran fine with no leaks. Personally, I would leave the bowl alone as it's barely visible when bolted down or one can purchase a new bowl for about $58; $265. Below are a few pics. All interested parties can e-mail bponti442@aol.com or call/text 501-454-4947. These are the two best ways to get a hold of me as I don't check PMs very often. Any Florida locals are more than welcome to swing by and take a look.
Thread
Thread Starter
Forum
Replies
Last Post
joepenoso
Big Blocks
12
November 20th, 2011 08:06 AM