I have a 330 out of a 67 Cutlass, a 350 from an unknown source, and a TH400 OC-68 with a 10” tail. For sale in Quakertown, PA. They all need rebuild. $100 for each engine, $50 for the trans.

Thanks,
Tim


330

330

W397154

330

350

350

350

TH400

 

That is the best 330 block and heads for rebuilding. 39 deg cam bank angle and #4 heads.

 

The 1968 OC trans is from a full size car with 455 2bbl motor. That trans won't have a provision to drive a speedometer cable.

 

Interesting. I assumed this was a plug that could be removed to accommodate a speedometer gear. Another reason to sell or scrap.

 

You'll notice that it isn't machined and the hole for the retainer bolt isn't drilled and tapped.

 

Not the end of the world, I had one of those rebuilt years ago for an A body and the shop was able to machine the hole for the speedo. It only added a nominal amount as the whole case was disassembled for the build.
That said, I have a similar 68 TH400 out of a full size also listed on this site that I don't need and can't get $100 bucks for it, so YMMV

 

I assumed the TH400 was likely scrap but offered it up first. I just want it out of my garage.