1977 Cutlass Parting Out
November 3rd, 2016, 03:42 PM
#1
Registered User
Thread Starter
Join Date: Aug 2016
Location: N. Illinois
Posts: 9
1977 Cutlass Parting Out
Before someone mentions it, the 73-77 olds site does not allow me to post. I have an account there but I can't post for some reason.
Parting out a 77 cutlass in the Northern Part of Illinois (Rockford area).
I have a Cutlass with T-tops that I will sell parts. Big parts need to be picked up.
Car has buckets and console, black interior.
If you need something PM me.
Small list
Fenders 50 each pick up
Doors 75 each pick up
Hood 50 pick up
console 75 Will ship
power seats 50 each Pick up
Header panel 50 Pick up
Let me know what you need and I'll price it cheaply for you
Thanks and Cubs are World Series Champions!!!!!
Parting out a 77 cutlass in the Northern Part of Illinois (Rockford area).
I have a Cutlass with T-tops that I will sell parts. Big parts need to be picked up.
Car has buckets and console, black interior.
If you need something PM me.
Small list
Fenders 50 each pick up
Doors 75 each pick up
Hood 50 pick up
console 75 Will ship
power seats 50 each Pick up
Header panel 50 Pick up
Let me know what you need and I'll price it cheaply for you
Thanks and Cubs are World Series Champions!!!!!
Last edited by o7ld3s; November 3rd, 2016 at 03:46 PM.
November 3rd, 2016, 04:16 PM
#3
Registered User
Join Date: Nov 2007
Location: Vancouver BC
Posts: 601
Looking for some small items, if the car has them.
1- Radio bracket, mount on the right side.
2 Radio output IC, basically a small chip mount inside on the right side. I can send a picture if you have a radio. Top comes off with 4 screws and the heat sink is mounted there.
3-Seat track bolt caps. Black plastic cover caps on the bolts at the front of the seat track.
4-shifter **** ,if in good condition, and you would sell separate.
5-shifter console wood grain if in good condition.
6- Clip that goes on cruise control speedo cable. If it has cruise. Looks like a 2" half loop band that goes around both the input and output cables right were the cable housings attach to the cruise module.
7-driver glass, soft-ray tinted. Might be a little wishful on my part, kind of too big to ship to Washington state.
Hope you can help
Thanks
Mike
1- Radio bracket, mount on the right side.
2 Radio output IC, basically a small chip mount inside on the right side. I can send a picture if you have a radio. Top comes off with 4 screws and the heat sink is mounted there.
3-Seat track bolt caps. Black plastic cover caps on the bolts at the front of the seat track.
4-shifter **** ,if in good condition, and you would sell separate.
5-shifter console wood grain if in good condition.
6- Clip that goes on cruise control speedo cable. If it has cruise. Looks like a 2" half loop band that goes around both the input and output cables right were the cable housings attach to the cruise module.
7-driver glass, soft-ray tinted. Might be a little wishful on my part, kind of too big to ship to Washington state.
Hope you can help
Thanks
Mike
November 3rd, 2016, 05:41 PM
#4
Hookers under Hood
Join Date: Nov 2013
Location: Ontario, Canada
Posts: 3,543
[QUOTE=o7ld3s;965811]Before someone mentions it, the 73-77 olds site does not allow me to post. I have an account there but I can't post for some reason.
You and many others.
I doubt the site will ever go back to what it was years ago.
Many guys have come over to Classic Olds, great group of guys here with awesome knowledge.
GLWS
Eric
You and many others.
I doubt the site will ever go back to what it was years ago.
Many guys have come over to Classic Olds, great group of guys here with awesome knowledge.
GLWS
Eric
November 28th, 2016, 03:33 PM
#6
Looking for some small items, if the car has them.
1- Radio bracket, mount on the right side.
2 Radio output IC, basically a small chip mount inside on the right side. I can send a picture if you have a radio. Top comes off with 4 screws and the heat sink is mounted there.
3-Seat track bolt caps. Black plastic cover caps on the bolts at the front of the seat track.
4-shifter **** ,if in good condition, and you would sell separate.
5-shifter console wood grain if in good condition.
6- Clip that goes on cruise control speedo cable. If it has cruise. Looks like a 2" half loop band that goes around both the input and output cables right were the cable housings attach to the cruise module.
7-driver glass, soft-ray tinted. Might be a little wishful on my part, kind of too big to ship to Washington state.
Hope you can help
Thanks
Mike
1- Radio bracket, mount on the right side.
2 Radio output IC, basically a small chip mount inside on the right side. I can send a picture if you have a radio. Top comes off with 4 screws and the heat sink is mounted there.
3-Seat track bolt caps. Black plastic cover caps on the bolts at the front of the seat track.
4-shifter **** ,if in good condition, and you would sell separate.
5-shifter console wood grain if in good condition.
6- Clip that goes on cruise control speedo cable. If it has cruise. Looks like a 2" half loop band that goes around both the input and output cables right were the cable housings attach to the cruise module.
7-driver glass, soft-ray tinted. Might be a little wishful on my part, kind of too big to ship to Washington state.
Hope you can help
Thanks
Mike
November 29th, 2016, 07:16 AM
#7
Registered User
Join Date: Nov 2007
Location: Vancouver BC
Posts: 601
Thanks Allykatt. I did find the power output IC. New. Amazing what you can find on e-bay with about 2 hours of time!!. I have the radio back from the repair shop all set to go. I was going to make a bracket, but I really would like an original. I have put the car back together 100% stock and I went way too **** about it. No sense stopping now. I was also able to find a NOS shifter ****. Man was I surprised to find one.
PM me and I can send you some money for your efforts.
Thanks again
Mike
PM me and I can send you some money for your efforts.
Thanks again
Mike
December 4th, 2016, 07:45 PM
#11
Registered User
Join Date: Mar 2012
Location: Dallas, Texas
Posts: 486
Allykatt you are correct but the Fusick catalog says,"The second design glass sections have a chrome trim around the
perimeter, the first design did not have the chrome trim." I have pointed out to them that they have this backwards in their catalog but it hasn't been changed in the at least 7 years since I first e mailed them about it.
perimeter, the first design did not have the chrome trim." I have pointed out to them that they have this backwards in their catalog but it hasn't been changed in the at least 7 years since I first e mailed them about it.
December 16th, 2016, 05:21 PM
#12
Registered User
Join Date: May 2014
Posts: 48
Allykatt you are correct but the Fusick catalog says,"The second design glass sections have a chrome trim around the
perimeter, the first design did not have the chrome trim." I have pointed out to them that they have this backwards in their catalog but it hasn't been changed in the at least 7 years since I first e mailed them about it.
perimeter, the first design did not have the chrome trim." I have pointed out to them that they have this backwards in their catalog but it hasn't been changed in the at least 7 years since I first e mailed them about it.
December 29th, 2016, 12:02 PM
#14
Registered User
Join Date: Jun 2015
Location: Tremont, Illinois
Posts: 57
Thread
Thread Starter
Forum
Replies
Last Post
