Before someone mentions it, the 73-77 olds site does not allow me to post. I have an account there but I can't post for some reason.

Parting out a 77 cutlass in the Northern Part of Illinois (Rockford area).

I have a Cutlass with T-tops that I will sell parts. Big parts need to be picked up.

Car has buckets and console, black interior.

If you need something PM me.

Small list

Fenders 50 each pick up
Doors 75 each pick up
Hood 50 pick up
console 75 Will ship
power seats 50 each Pick up
Header panel 50 Pick up

Let me know what you need and I'll price it cheaply for you

Thanks and Cubs are World Series Champions!!!!!

 

We have an increasing membership of 73-77 models, glws.

 

Looking for some small items, if the car has them.
1- Radio bracket, mount on the right side.
2 Radio output IC, basically a small chip mount inside on the right side. I can send a picture if you have a radio. Top comes off with 4 screws and the heat sink is mounted there.
3-Seat track bolt caps. Black plastic cover caps on the bolts at the front of the seat track.
4-shifter **** ,if in good condition, and you would sell separate.
5-shifter console wood grain if in good condition.
6- Clip that goes on cruise control speedo cable. If it has cruise. Looks like a 2" half loop band that goes around both the input and output cables right were the cable housings attach to the cruise module.
7-driver glass, soft-ray tinted. Might be a little wishful on my part, kind of too big to ship to Washington state.
Hope you can help
Thanks
Mike

 

[QUOTE=o7ld3s;965811]Before someone mentions it, the 73-77 olds site does not allow me to post. I have an account there but I can't post for some reason.

You and many others.
I doubt the site will ever go back to what it was years ago.
Many guys have come over to Classic Olds, great group of guys here with awesome knowledge.
GLWS

Eric

 

please check your pm's I am interested in that hood and a few other parts.
thanks,
tom

 

Mike , if you haven't found the 2 radio parts ? I have both .

 

Thanks Allykatt. I did find the power output IC. New. Amazing what you can find on e-bay with about 2 hours of time!!. I have the radio back from the repair shop all set to go. I was going to make a bracket, but I really would like an original. I have put the car back together 100% stock and I went way too **** about it. No sense stopping now. I was also able to find a NOS shifter ****. Man was I surprised to find one.
PM me and I can send you some money for your efforts.
Thanks again
Mike

 

I'm looking for pulleys and brackets for the front of the engine. Possibly if price is right I may be interested in engine & transmission.

 

Do you have front & rear bumper...t-top weatherstripping & opera window trim

 

Fusick carries the t-top trim for 2nd generation . Don't carry it for first Gen . 1st Gen has a stainless border all the way around the edge of t-top glass . 2nd generation don't .

 

Allykatt you are correct but the Fusick catalog says,"The second design glass sections have a chrome trim around the
perimeter, the first design did not have the chrome trim." I have pointed out to them that they have this backwards in their catalog but it hasn't been changed in the at least 7 years since I first e mailed them about it.

 

Texxas- hi larry b from the 73-77 site. You are correct fusick has a bad write up, I have fusick seals and all three gen frames. The fusick seals are gen 3 , probably could make them work with gen 2 if you don't mind cutting material off of $600 seals. I ordered supreme seals from fusick and the b pillar length was too short. I think Steele has the supreme roofline and cutlass s reversed. Fusick was great and returned for the other part #. Don't visit this site much but appears the love for 73-77 is growing over here. Take care Larry

 

I need the black with white striped trim piece for the rear bumper. For the life of me I can't come up with the correct name of it. It runs the entire length of the bumper.

 

Impact strip?