1968 Cutlass Part Out
#8
It's a little crack on the far passenger side. I couldn't even see the damage until after I pulled the windshield.
I am going to pull it to sale. I was thinking $80.00.
I'll post some pictures.
I am going to pull it to sale. I was thinking $80.00.
I'll post some pictures.
#9
thanks.. how much for the heater control unit? Do you have a non air unit also?
you can send pics to me at w442309@aol.com....
thank you!
tim
you can send pics to me at w442309@aol.com....
thank you!
tim
#11
#13
passenger side piece of chrome on top rear of the fender, near the windshield. need all three mounting posts on back to be intact. poor chrome is ok. prefer no pits. basically need a nice core to rechrome. looking for two if you have them.
Thanks,
Chris
Thanks,
Chris
#14
Chris,
I will check tomorrow and get back with you.
MadDoctor,
I have the front arm rest as well. They do not have the pads on them. But you can get pads from OPGI. PM Sent
I will check tomorrow and get back with you.
MadDoctor,
I have the front arm rest as well. They do not have the pads on them. But you can get pads from OPGI. PM Sent
#16
I only require the rears. I bought front ones new this summer. Find me an "all in" price for the rears and let me know how you want payment. Arm rests.
Last edited by maddoctor; October 27th, 2015 at 05:17 PM. Reason: fully describe the parts required.
#18
Rear Armrests
18 Shangrila Terrace
Bolton, Ontario
Canada L7E2N2
Would USPS be cheaper??
First class is about 12 bucks. These are not big and not heavy- one pound at most. Its your call. Keep those gov workers working!!!
Bolton, Ontario
Canada L7E2N2
Would USPS be cheaper??
First class is about 12 bucks. These are not big and not heavy- one pound at most. Its your call. Keep those gov workers working!!!
Last edited by maddoctor; October 27th, 2015 at 06:06 PM. Reason: Add extra info.
#26
Looking for a 67-68 3 spoke steering wheel in black. I need one in fixable condition as long as the hub is not cracked like mine. send pics if you have one or two.
Gerald
gnickels@rocketmail.com
Gerald
gnickels@rocketmail.com
#36
#40
jujutheclown,
Sorry, I do not have the stainless trim. I do have the pot metal piece that goes on the end and wraps over the roof.
No bucket seats right now.
I have two consoles with wiring and shifters.
send me a text for pictures
Sorry, I do not have the stainless trim. I do have the pot metal piece that goes on the end and wraps over the roof.
No bucket seats right now.
I have two consoles with wiring and shifters.
send me a text for pictures