postw30man

I have the upper stainless steel trim for the front fenders. This is the piece that runs along the upper length of the fender. I also have the 2 quarter window stainless and all 6 pieces of the roof rail stainless. These items are off a 1968 and may fit 69. I'm asking $250.00 for all plus shipping. 224-688-5257. Tony

maddoctor

Would you still have this, I know it's an old post but I thought I would ask.

2170mark

What stainless parts do you need.? I can go thru my extras to see if I have a complete set or just sell individual parts. I’m in PA

maddoctor

I require the full set, three pieces on each side and I require both sides.
Thank you.

2170mark

I have 5 of the six. Missing 1 door but they are the same left and right. The front fender mouldings as far as I have ever seen are 69 only but will fit 68 if you delete the front potmetal part. The quarter trim is 68/69. The fenders and quarter trim are side specific. They are still very good with no kinks. Only need picked a little and polished. Let me know. I’m in Central PA.

droldsmorland

If it matters to the buyer....those front fender peak trim pieces are the later 68 version which was one piece. Or 69.
The car below illustrates the early two-piece design with the pot metal chrome leading piece.

The cut-in for the one-piece design was mid-February 1968 for the 68 model year.

All 69s got the one piece. Crash replacement parts were reported to be the one-piece design unless you crashed your Sept 67 car in October 67.
Best pic I could dig out not being home to take a pic of the early 68 in the garage.

.

BackInTheGame

The door trims are not the same left and right. They are mirror images of each other, just as the other pieces are, and have different part numbers for left and right. The ends do not have square 90' corners, they follow the contour of the door; kind of trapezoidal. They are about a 1/16th of an inch longer/wider on each end of the the bottom length than they are on the top.