AJFink

Do you have any front fender 1/4s for a 72 cutlass supreme? I live in Prescott Washington I'll pick up.

2blu442

I've got front fenders but am unclear on your message. Are you also looking for quarter panels? Please send me a PM or email with a little more detail on what your needing. John

2blu442

Did you find the parts you need?

2blu442

Sorry, I don't have any extras at this time.

John

66 Olznut

Do you have an ashtray and a steering column cover on the dash for a 66 f85?

tcarroll

Looking for a long window crank in good condition with a black **** for a 1968 Olds Cutlass must be an original one : )

Mtaman

Dear seller do you have any parts for my 75 olds delta 88, I would need the interior door panel light covers ( they are half red/ half white) and also the plastic fuel door assembly located under the trunk key. If u have these items how much for everything?

2blu442

66 Oldsnut, tcaroll I'm pretty sure I have what you need. Please send me a reminder on Saturday and I'll see what I can find.

Mtaman, Over the years I've dismantled a 1971 Delta 88 and a 1973 Olds 98. If either of those interchange I may have what you need. If you haven't found the parts by Saturday please send me a reminder and I'll dig around to see if I can match the parts.

John

tcarroll

John are you sure they are interchangeable from those models to Cutlass?

Thanks Todd

2blu442

Todd, the interchange was for Mtaman. Over the years I've dismantled three 1968 Cutlass's. I'm thinking of looking through those parts for your window crank.

John

tcarroll

Awesome thanks a lot : )

CQR

John, Looking for a Complete steering wheel (driver quality) for a 70 wagon. Black please. Any help?

Lballow

67 Delmont 88 - Looking for hood, bumper, left fender and a few other parts. Delmont preferable or any 88/98 that will fit. Any thing right now? If not, know any place I can look?

Ceegee424

I have a 73 Delta 88 with a 455. I attempted to get the motor rebuilt. Not only did he not finish, but he also left a puzzle for the shop who currently has my car. He lost all of my bolts, nuts and skrews that's used to mount my hardware to my motor. Motor mount bolts, alternator bolts, harmonic balancer, fan that's attached to the water pump along with the bolts, bell housing bolts, power steering bolts. Can anyone lead me in the right direction to get these bolts replaced. Or even the sizes and threads of them. I went to every local junkyard with no luck. Thanks in advance.

2blu442

Sorry for the delay in replying guys. Due to my work schedule I don't have time to do the car stuff until the weekends. I'll add your requests to the list of parts I'm looking for this weekend. John

Ttopcutty

How much for 6 heads and j heads?

tcarroll

Looking for a long window crank in good condition with a black **** for a 1968 Olds Cutlass must be an original one : ) Any help would be appreciated.

Ficks

Still looking for nice remote mirror for 64 cutlass.

66vert

Looking for 2 back-up light lenses, trunk Cutlass emblem and a good hood, for starters. Would probably pick up the hood in Medford- I'm up for a road trip. I'm in Chehalis, Washington

2blu442

Ttopcutty, I've got some complete 1970 350's but don't think I've got a set of loose #6 heads at this time. I have lots of J's and would sell a set with a visual check for $40 plus shipping. Or better yet, I'll have them hot tanked and magnifluxed to make sure they're not cracked for $75 plus shipping.

tcarroll, I thought I found one but in the bright sunlight I believe the **** is dark blue. I'll keep looking.

Ficks, I don't think I've got an extra but will look.

66vert, I replied to your parts wanted post. I've got two hoods that are decent, shipping would require building a crate but if you came down you could look at them both.

John

Ttopcutty

Ttopcutty

How much for the 350s and do you have any 3,4,5,7 heads want to get better flow......i have 3b heads

2blu442

Are you close enough to pick up or would the engine have to be shipped? I've got 1968, 70, 71 and 73 350 engines. I'll have to look this weekend to see what loose heads I've got. John

Ttopcutty

Georgia

2blu442

You could likely save money on shipping if you found something closer. To give you a price to work with I'd be selling a long block plus the intake, oil pan, valve covers, timing cover. So the engine would be sealed up but missing bolt on parts like brackets, pulleys, exhaust manifolds. Price on the 1973 would be $200 but the #8 heads mean you'd need flat top pistons for good compression. The 1968-71's would be $300-350 plus shipping. A couple were runners but at this point I'd consider them as all needing rebuilt. John

Ttopcutty

Ok someone told me as long as i stay under 6000rpm my 77 350 should be fine with the windowed mains.....just interested in heads nows

Ceegee424

Looking for mounting hardware and brackets for air compressor, water pump, power steering pump on a 73 delta 88 455.

2blu442

I probably have that. But those are common items that many members would have extras of. I'd encourage you to create a parts wanted ad showing your location, city/state/province or country. Then try to find the items nearby to save on shipping costs. If you strike out or can't find them at a price your comfortable with get back to me and I'll try to get an estimate for you including shipping. John

Ceegee424

Honestly my car has been sitting waiting on those parts for 4 months after my engine rebuild. The soonest I can get them the better. I will cover shipping no problem.

Tallpaul67

I need an axle for a 1967 Oldsmobile 12 bolt type "o" rear.

2blu442

So your looking for a single axle, not the entire rear end correct? I'm not an expert, but as long as it has the correct number of splines I would think any of the type O rear ends 67-70 would be the same. If your just needing the axle do you need one with 28 splines? I think the 31 splines are 68-69 only, but am not sure. John

2blu442

Sorry, last weekend was busy and got away from me. Are you still needing these parts? If so I'll try and dig them up this weekend. John

Ceegee424

Yes I still need them.

Tallpaul67

Hey john, yes I am looking for 1 axle 28 spline. I believe the 31 spline are for gear ratios of 3:55 and up. My understanding is that the type o 12 bolts have compatable axles but do not interchange with the 10 bolts. The length of my axle is about 29 and 3/4 if measured from the flange on a diagonal to the tip of the axle where the splines are. If it turns out to be a match what would you want for the axle??
Thanks
Paul

2blu442

Ceegee424, do you need the correct style for 1973 or will parts that fit and function work for you? I'm asking as I've got several sets of mid-late 1970's power steering brackets but am still looking for a complete set of the earlier style. They will both fit and function, but if your looking for original appearance these may not work for you.

Tallpaul67, I thought I had a type O rear end already missing one axle, but I was wrong. I do have some complete type O rear ends and could pull one from a 1968 rear end. If I did that I'd need $50 for the axle and shipping across the country might add another ~$30 to the costs. If that's in your ballpark I'll get a more precise shipping cost for you to consider before pulling the axle. John

Ceegee424

Basically the standard parts for a stock 455, I also need the water pump pulley.

alburk

John
Do you have a core support for a 69 cutlass?
Thanks,
Andy

creektrails

I'm in Ky and am looking for a set of heads from a 1967-1972 350 with casting numbers 4, 5, 6, 7, or 7A. I am wanting to put them on a 79 350. Any help would be appreciated.

2blu442

Ceegee424, can you send me the 2 letter code on your crankshaft pulley so I can match it?

alburk, yes I have a couple 1969 core supports. They are large and shipping very far can be spendy, where are you located?

creektrails, I've got several core engines with these heads but am unsure if I have a loose set but I'll check.

John

creektrails

Thanks keep me updated.