Parts For Sale Please read forum guidelines before posting.

1954 & 1955 Olds 88 sheet metal and frames

Thread Tools
 
Search this Thread
 
Old Nov 14, 2018 | 10:02 AM
  #1  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon
1954 & 1955 Olds 88 sheet metal and frames

Hi All
Over the past few years I've dismantled a 1955 Olds 88 four door sedan and a 1954 Olds 88 2 door hardtop. I've sold a lot of mechanical and interior parts, but am now down to misc sheetmetal and the two frames that are taking up space I need. So here's a few items that people might use for patch panels or replacement of rusted areas on their cars. Please contact me with any questions or to see any views not clear in the photos here. Parts are located in Medford Oregon, if you can pick up items I'll discount the prices by 20% as it will save me the time to put on a pallet and ship the items. I'm willing to cut and ship just parts or areas that you need for patches.

1954 parts
Frame complete $200
Rear frame portion, whatever amount you want cut off $100
Body to frame mounts $35
Front suspension parts $100 all
Roof, with good window channels, not rotted $100
Drivers side quarter panel $350
Drivers side front fender $150
Passengerside front fender $200
Firewall complete $250
Windshield channel and dash $200
Trunk floor $100
Front seat core to rebuild $100
Back seat core to rebuild $100

1955
Frame complete $200
Rear frame portion, whatever you want cut off $100
Body mounts $35 each
Front A-arms, I have 3 of the 4 left $25 each
Front brake drums/spindles complete $45 each side
Firewall complete $150

Attached are a few photos.
Old Nov 14, 2018 | 10:07 AM
  #2  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon













Old Nov 14, 2018 | 10:09 AM
  #3  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon

I had to chuckle, when I removed the windshield I found these old church key can openers down at the base of the glass!
Old Nov 14, 2018 | 10:13 AM
  #4  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon


The tags on this car had expired in 1963, so it had been sitting a long time! Here's pictures of the muffler, could it be the original one?
Old Nov 17, 2018 | 09:06 AM
  #5  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon
ttt I'll try to add some pictures of the fenders and quarter panel soon. I've never seen one of these frames sell, so maybe there's no demand for them! I do need the space and at some point will cut them up and save the sections I think someone might need like the body mounts and rear cross piece. John
Old Aug 8, 2022 | 01:08 PM
  #6  
Moldsmobile98's Avatar
Registered User
 
Joined: May 2015
Posts: 21
54 sheet metal

Any chance you have some sheet metal from the 54 2 door still. I have a 55 and am looking for rockers back to the wheel well. Both sides. Also C-pillars. I'm thinking 54 and 55 are similar enough to make work. I'm near Eureka, CA so not too far away.
Thanks, Josiah
Originally Posted by 2blu442
ttt I'll try to add some pictures of the fenders and quarter panel soon. I've never seen one of these frames sell, so maybe there's no demand for them! I do need the space and at some point will cut them up and save the sections I think someone might need like the body mounts and rear cross piece. John
Old Aug 9, 2022 | 09:48 AM
  #7  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon
Originally Posted by Moldsmobile98
Any chance you have some sheet metal from the 54 2 door still. I have a 55 and am looking for rockers back to the wheel well. Both sides. Also C-pillars. I'm thinking 54 and 55 are similar enough to make work. I'm near Eureka, CA so not too far away.
Thanks, Josiah
Hello Josiah, I don't think I do but will look around and see.
Old Mar 24, 2024 | 10:35 AM
  #8  
Honky bill's Avatar
Registered User
 
Joined: Nov 2016
Posts: 16
Hi I'm taking a shot in the dark. I'm wondering if the trunk floor is still available? Like I said a shot in the dark!
thank you for your time
Paul
Old Mar 25, 2024 | 07:10 PM
  #9  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon
Originally Posted by Honky bill
Hi I'm taking a shot in the dark. I'm wondering if the trunk floor is still available? Like I said a shot in the dark!
thank you for your time
Paul
Hi Paul. I don't think I have that any longer but will look through my clutter to see for sure. John
Old Mar 26, 2024 | 02:09 AM
  #10  
Honky bill's Avatar
Registered User
 
Joined: Nov 2016
Posts: 16
Thank you
Old Mar 29, 2024 | 05:11 PM
  #11  
Honky bill's Avatar
Registered User
 
Joined: Nov 2016
Posts: 16
Hi John, sorry for the late reply. If you have any luck finding it I'm interested. Please let me know when you get a chance.
Thank you for your time Paul


Old Mar 31, 2024 | 01:01 PM
  #12  
2blu442's Avatar
Thread Starter
Moderator
 
Joined: Sep 2006
Posts: 14,272
From: Medford, Oregon
Originally Posted by Honky bill
Hi John, sorry for the late reply. If you have any luck finding it I'm interested. Please let me know when you get a chance.
Thank you for your time Paul
Hi Paul
I'm sorry, but I no longer have the trunk floor from this car. I will update this thread marking the items I no longer have. I've since collected more from this vintage and will either add them to this post or create a new thread. John
Old Mar 31, 2024 | 02:08 PM
  #13  
Honky bill's Avatar
Registered User
 
Joined: Nov 2016
Posts: 16
Hi
Old Mar 31, 2024 | 02:09 PM
  #14  
Honky bill's Avatar
Registered User
 
Joined: Nov 2016
Posts: 16
Hi John, no problem. Like I said a shot in the dark. Thank you for your time and take care!
Paul
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
scrappie
Body work
9
Sep 1, 2019 06:47 AM
2blu442
Parts For Sale
9
Jul 23, 2019 12:04 PM
yeahbuddy
Parts For Sale
3
Jun 1, 2019 02:18 PM
gearheads78
Cars For Sale
4
Dec 7, 2017 07:16 PM




All times are GMT -7. The time now is 10:07 AM.