Question on Underbody Color on Cutlass / 442 Assembled in Framingham

Thread Tools
 
Search this Thread
 
Old Jan 7, 2018 | 08:18 AM
  #1  
Kaline's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 145
From: Royal Oak, Michigan
Question on Underbody Color on Cutlass / 442 Assembled in Framingham

For 1972 vehicles assembled in Framingham, I have the follow questions:

1. Were the underside of the floor pans painted body-color or semi-gloss black?
2. Was the underside of the hood painted body-color or semi-gloss black?

I know from studying an unrestored 1972 Cutlass Supreme assembled in Lansing, both the underbody and the underside of the hood were body color. I am not sure if all the assembly plants followed this strategy. Thanks in advance for your input!
Old Jan 7, 2018 | 10:40 AM
  #2  
RetroRanger's Avatar
72 Olds CS
 
Joined: Jun 2011
Posts: 6,657
My442 worked at the Framingham plant at some point.

My Arlington built 72 was mostly red oxide primer under w body color overspray.
Old Jan 7, 2018 | 02:03 PM
  #3  
My442's Avatar
Registered User
 
Joined: Feb 2009
Posts: 2,257
The bodies (firewall back) with doors and deck lids were dipped in a huge vat of red oxide primer, then sent through an oven to dry. The bodies were then painted.

The bottoms of the cars had overspray on them.

The front clips were painted separately, and them married to the body at the body drop station.

The underside of the hood was painted body color.
Old Jan 7, 2018 | 06:03 PM
  #4  
Kaline's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 145
From: Royal Oak, Michigan
Thank you very much!!!
Old Jan 7, 2018 | 07:32 PM
  #5  
70Post's Avatar
Registered User
 
Joined: May 2008
Posts: 3,627
From: Austin, Texas
Underside of hoods were black....with some possible body color overspray near the edges.
Old Feb 3, 2018 | 10:40 AM
  #6  
Miles71's Avatar
Registered User
 
Joined: Oct 2011
Posts: 611
From: Chelmsford, Mass
My Framingham 1971 CS, all original has Red oxide primer on the underside of the floor pans.
This car only has 36,000 original miles.




Red Oxide, Underside near fuel tank. The whole underside of my 71 CS Framingham car is this red color.


Near Transmission. There is even Red inside the floor support.

Last edited by Miles71; Feb 5, 2018 at 07:00 AM. Reason: Added new images.
Old Feb 3, 2018 | 05:47 PM
  #7  
costpenn's Avatar
Registered User
 
Joined: Jun 2011
Posts: 2,866
From: Carrolllton Texas
Same here - my 71 Supreme had very litlle black on the floor undersides, red oxide is far and away the dominant color. Totally unlike the Lansing cars I have done which are almost all black or body color overspray.
Old Feb 4, 2018 | 05:28 PM
  #8  
anthonyP's Avatar
Registered User
 
Joined: Feb 2009
Posts: 2,057
From: Poconos, Pennsylvania
Because my brother's Framingham built '71 442 was undercoated by the dealership, always thought the underside of the floor pans were black. So did the Fremont assembly plant, in addition to the Framingham and Arlington plants, also use the red oxide primer? Did Lansing use the red oxide primer, then spray black paint on the underside of the floor pans?
Old Feb 5, 2018 | 07:11 AM
  #9  
Miles71's Avatar
Registered User
 
Joined: Oct 2011
Posts: 611
From: Chelmsford, Mass
My 1970 CS is also a Framingham Mass, car. This car had the underside coated with black stuff, most likely by the dealer. The 70, has 135k miles and more rust. There are some indications it may have been undercoated in red. I will try to check get some pictures soon.


1970 Cutlass Supreme, Built in the town of Framingham Massachusetts.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BAOKBOB
General Discussion
0
Nov 23, 2017 07:19 AM
442KoneKilr
Parts For Sale
8
Oct 14, 2015 09:02 AM
costpenn
Cutlass
10
Sep 28, 2015 05:15 PM
allyolds68
General Discussion
12
Aug 10, 2015 05:20 PM
wills30
442
3
Aug 18, 2014 06:28 PM




All times are GMT -7. The time now is 08:07 AM.