STLCRZY

really need help guys...want to swap from round 2 speed wiper from motor to a rectangular 2 speed Wiper motor http://www.summitracing.com/parts/AA...ake|OLDSMOBILE reuse the stock 65 arm but notice that the arm hit the inner fire-wall.

My question is if anybody know if the linkage from the rectangular (maybe 67) models are different than from the 65 models...?

Car is 65 442

2blu442

Hi Denis
This may be a one speed rather than 2 speed wiper. I say that because it only has two forks for the wiring. One of the 1965 guru's will have to clarify. But I removed these pieces from a 1965 F85. Let me know if there's another view or measurement you'll like to have. John

PA191318.jpg

PA191320.jpg

PA191319.jpg

PA191321.jpg

PA191322.jpg

PA191323.jpg

PA191324.jpg

PA191325.jpg

PA191326.jpg

PA191327.jpg

PA191328.jpg

PA191329.jpg

Run to Rund

In 66 both motors were used. That is the year I am familiar with; the arms were different, and the connectors to the motor and pump were different, with the same wires but arranged differently. Also the dash switches were different with different connectors and again the wires arranged differently.

STLCRZY

Many thanks, it helps a lot...i measure and placed a new hole for the arm...works !!!


thanks

HonestDave

I have now finished removing a 2 speed wiper system and replacing it with a 1 speed system, all because I thought it looked weird. Then I read my assembly manual. Wouldn't you know, the 65 Cutlass could be ordered with the same assembly I just removed !! Adapter plate and all......no, I am not amused. Think I'll sell the 2 speed system now that it's out. Brand new motor as well.......

Pr'aps I need a new hobby.