The Newbie Forum The place where you should introduce yourself. Do not ask technical questions here, use the site forum sections.

New from Lombard IL.

Old January 20th, 2013, 10:47 AM
  #1  
Registered User
Thread Starter
 
hispanicviking's Avatar
 
Join Date: Jun 2012
Location: Lombard IL.
Posts: 4
New from Lombard IL.

Hi all , My name is Steve I'm in the middle of building my 56 Olds 88 2 door sedan. I've had the car now for about 6 years The original 324 blew up on me a year after I bought the car . I had no money to rebuild it so I sold the motor and trans, and put a sbc th 400 I had laying in my garage. It's temporary for right now. I have a 71 455 out of a 98 that I'm going to have rebuilt for the 56. It needs an Olds back in it !!. Last year I decided to repaint my Olds. It had a real bad paint job on it when I got it then the sun beating on it turned the paint into sand paper. So I blocked the whole car down and did what body work primed it, blocked it again, primed it, wet sanded it . Then paint it. It was a hell of a learning experience. My first time doing body work and paint. It came out good. I went with Hot Rod Flatz mint green. I have a build thread on the Hamb http://www.jalopyjournal.com/forum/s...ght=56+olds+88
I was hoping somebody on here can help me. When I bought my car It had no side trim on it . I found trim off a 2 door hard top but the rear quarter trim is diffrent. The 2 door sedan has been a real pain to find. If somebody out there knows of any trim for this car it would be a great help.
hispanicviking is offline  
Old January 20th, 2013, 10:50 AM
  #2  
Chevy budget Olds powered
 
coppercutlass's Avatar
 
Join Date: Jul 2011
Location: Elgin, Illinois
Posts: 8,632
I grew up in the lombard area welcome to the site.
coppercutlass is offline  
Old January 20th, 2013, 11:17 PM
  #3  
Registered User
 
stevengerard's Avatar
 
Join Date: Jul 2008
Location: Chi-town
Posts: 4,511
welcome, post some pics, lots of folks live around you
stevengerard is offline  
Old January 21st, 2013, 04:37 AM
  #4  
Registered User
Thread Starter
 
hispanicviking's Avatar
 
Join Date: Jun 2012
Location: Lombard IL.
Posts: 4
Thanks for the reply's I'll try and get some pics soon.
hispanicviking is offline  
Old January 21st, 2013, 07:58 AM
  #5  
GM Enthusiast
 
OLD SKL 69's Avatar
 
Join Date: Jan 2007
Location: Long Island, New York
Posts: 3,982
Welcome to CO! Look forward to seeing the pics too.
OLD SKL 69 is offline  
Old January 21st, 2013, 09:01 AM
  #6  
Administrator
 
oldcutlass's Avatar
 
Join Date: Oct 2009
Location: Poteau, Ok
Posts: 40,630
Welcome - the green looks great.
oldcutlass is online now  
Old January 21st, 2013, 12:28 PM
  #7  
Registered User
 
citcapp's Avatar
 
Join Date: Nov 2007
Location: Rathdrum, Idano
Posts: 9,127
Welcome to CO

Can't help you with the trim pieces, but if you decide to install a 455 in your 56 I can help you with that. I installed a 455 an turbo 400 in my 57 which is very similar
citcapp is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sickle
The Newbie Forum
8
August 31st, 2013 08:28 AM
ah64pilot
Major Builds & Projects
141
September 19th, 2012 10:55 AM
ah64pilot
Major Builds & Projects
41
August 17th, 2012 02:36 PM
skinny
Chassis/Body/Frame
5
April 23rd, 2007 02:46 PM
redrumloa
Cutlass
6
March 10th, 2007 06:45 PM


Thread Tools
Search this Thread
Quick Reply: New from Lombard IL.



All times are GMT -7. The time now is 04:59 AM.