Induction and need some help
Thread Starter
Registered User
Joined: Jul 2016
Posts: 3
Induction and need some help
I am working a a 1972 Cutlass Supreme. Doing a motor swap from 350 to 455 (year 1968).
My issue is: with the 350 frame and motor mounts the motor seems to be sitting low. The oil pan is just missing steering rod.
The 455 frame and motor mounts will not allow the motor to sit in the mounts and oil pan hits steering rod.
The pads are in the far back position as original.
Thoughts and suggestions?
My issue is: with the 350 frame and motor mounts the motor seems to be sitting low. The oil pan is just missing steering rod.
The 455 frame and motor mounts will not allow the motor to sit in the mounts and oil pan hits steering rod.
The pads are in the far back position as original.
Thoughts and suggestions?
Administrator
Joined: Oct 2009
Posts: 42,512
From: Poteau, Ok
Welcome to the site. This is a good read:
https://classicoldsmobile.com/forums...tion-list.html
https://classicoldsmobile.com/forums...tion-list.html
Thread
Thread Starter
Forum
Replies
Last Post
