GM " Oldsmobile " Decals.
Acquired these from an Olds Dealership in the mid 90's.
​​​​Made of Waterproof UV resistant vinyl.
Decal color is WHITE.
Must be applied to a SMOOTH dry surface.

I have multiples of 3 different types as described in photos.
Pricing INCLUDES shipping to the lower 48 US.
$20 each.


Windshield banner (slightly curved).
Top (#1) - 24" x 3.5"
Bottom (#2) - 27" x 3.75"


#3 Large (straight not curved).
30" x 4.5"



#3 on smooth wall.



I have recently applied over a dozen of these on various smooth surfaces with 0% failure. (Side of my truck, windshield, wall, glass door, tool box, plexiglass for sign ect.)
Method I used for adhering Decal;
- Clean smooth surface with a rubbing alcohol/water mix.
- Peel white paper backing exposing adhesive side of decal.
- Place decal in desired location starting at one side peeling back paper as you press decal into place.
- Rub protective paper and decal with a decal squeegee/scraper.

​​​​​​Be sure to rub all outer edges and corners to promote adhesion.
- Tricky part - Slowly peel protective paper working it back and forth at as close of an angle to the decal as you can get. Be very careful of 90° edges of decal lettering.
NOTE:
Soaking protective paper with a sponge of Dawn soap/water solution will make this easier.
Do NOT apply on cold surface.
Do NOT use soapy water solution on surface for placement of decal.

Thanks for looking.

 

Ttt

 

Ttt

 

Ttt