Good welder needed

Reply Subscribe

Thread Tools

Search this Thread

April 12th, 2021 | 07:50 PM

Goldiewilson4mayor

Thread Starter

Goldiewilson4mayor

Joined: Dec 2019

Posts: 77

From: Lake Saint Louis Missouri

Good welder needed

Looking for some to weld up the turn signal holes on my head light surrounds on a 67 cutlass. Need good enough so they will polish out and not be noticed. Any ideas welcome

April 12th, 2021 | 07:52 PM

66SportCoupe

Registered User

Joined: Nov 2019

Posts: 1,259

From: St. Michael, MN

Buy new or NOS ones. Way cheaper

April 12th, 2021 | 07:53 PM

Goldiewilson4mayor

Thread Starter

Goldiewilson4mayor

Joined: Dec 2019

Posts: 77

From: Lake Saint Louis Missouri

I want to weld up the hole that the turn signal was in.

April 12th, 2021 | 08:00 PM

66SportCoupe

Registered User

Joined: Nov 2019

Posts: 1,259

From: St. Michael, MN

In the bezel or core support?

April 12th, 2021 | 08:25 PM

Goldiewilson4mayor

Thread Starter

Goldiewilson4mayor

Joined: Dec 2019

Posts: 77

From: Lake Saint Louis Missouri

In the bezels.

April 12th, 2021 | 08:28 PM

66SportCoupe

Registered User

Joined: Nov 2019

Posts: 1,259

From: St. Michael, MN

Nobody will touch that. Too fragile. And then why would you want to?

April 12th, 2021 | 08:31 PM

Goldiewilson4mayor

Thread Starter

Goldiewilson4mayor

Joined: Dec 2019

Posts: 77

From: Lake Saint Louis Missouri

I don't need the turn signals . They are a part of my outer headlights . I am also reworking a 59 dynamic 88 grill to fit where the grill bar was.

April 12th, 2021 | 08:33 PM

Goldiewilson4mayor

Thread Starter

Goldiewilson4mayor

Joined: Dec 2019

Posts: 77

From: Lake Saint Louis Missouri

I guess I could recast them as thicker aluminum and then polish that. Or I could cast them in bronze and have them plated. I was just trying to do it the easy way.