Hi guys.

I am restoring the center console of the car, I have encountered several questions that I would like to share here so that you can help me.
First of all, as I put in the image below, at some point in the life of the console that piece that was there has broken. Could you take a photo of that piece from the front and side to see how it was placed?

On the other hand, on the back of the lid I find that the fit is not very good, should I put a piece there that I am missing?

Do you think something is missing here? I see the screws but I don't know if there should be anything there.

I hope you can help me.
Thanks in advance.

Regards

 

there is a metal base plate that screws to the cover

 

On your broken console bracket, I believe the two brackets are similar to each other. I don't have a picture of it from the bottom or side though.
There's a picture from the top in this thread: Center Console Removal (72 cutlass vert)

 

Hi.

Thanks for the help.
The broken bracket I have on the console is to help align the console itself.
I didn't know that there was a plate in that area, I will keep it in mind for future purchases.

Thanks guys

 

here is a post with a lot of good images.
https://classicoldsmobile.com/forums...onsole-173852/

 

Thank you very much, those images are very useful to me.