Can anyone tell me the bolts sizes for the engine mounts

thanks Bruce

 

Hi Bruce
So are you needing specs on the bolts that hold the rubber mount to the engine? Or one of the other ones?

John

 

John
I need specs on the ones that bolt to engine block and the 3 that fasten to the frame.

Thanks Bruce Black

 

OK, I pulled these from parts cars so there's a chance they've been changed over the years. But they fit and look correct. The two that attach the motor mount to the side of the block are 7/16" bolts and are 1 inch long. The threads are 14 per inch which I think is a common pitch. The three bolts that hold the metal perch to the frame cross member are 3/8" bolts and 1 inch long. These have a nut with a lock washer on the engine side of the cross member. Let me know if you need anything else Bruce.

John