General Questions Place to post your questions that don't fit into one of the specific forums below.

1962 super 88 no dash lights

Old Jun 17, 2019 | 10:42 PM
  #1  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
1962 super 88 no dash lights

My olds has no dash lights, radio, or clock, cigarette lighter. Fuses are good. , gen light and oil light work , turn signals work , interior lights work.. any help would be great
Old Jun 18, 2019 | 06:04 AM
  #2  
61Bat's Avatar
Registered User
 
Joined: Apr 2016
Posts: 485
From: Wentzville Mo, Chuck Berry RIP!
I would check the plugs behind the dash possibly loose or unplugged. Do you have a wiring schematic?
Old Jun 18, 2019 | 06:24 AM
  #3  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
Originally Posted by 61Bat
I would check the plugs behind the dash possibly loose or unplugged. Do you have a wiring schematic?
Yeah I do have a wiring schematic, thanks
Old Jun 18, 2019 | 06:25 AM
  #4  
edzolz's Avatar
Registered User
 
Joined: Nov 2009
Posts: 3,009
From: Red Oak, Texas
Do you have tail/brake lights? Most of the older cars had the rear lights on the same circuit with the dash lights so you would know if your rear lights had gone out. Narrows down the area to look.
Old Jun 18, 2019 | 06:27 AM
  #5  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
Originally Posted by edzolz
Do you have tail/brake lights? Most of the older cars had the rear lights on the same circuit with the dash lights so you would know if your rear lights had gone out. Narrows down the area to look.
Yes have brake lights, tail lights, turn signals, and reverse lights
Old Jun 18, 2019 | 08:42 AM
  #6  
61Bat's Avatar
Registered User
 
Joined: Apr 2016
Posts: 485
From: Wentzville Mo, Chuck Berry RIP!
Cigar lighter has its own circuit direct to fuse box so check for power at the outlet side then at the lighter. loose connection or bad lighter maybe?

Clock is on the same circuit as the instrument lights so I would check the connector there.
Old Jun 18, 2019 | 11:05 AM
  #7  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,496
From: Poteau, Ok
One thing at a time. Is the dash pot for the instrument lights turned up all the way? Is there voltage at both sides of the fuse box lamp fuse?
Old Jun 18, 2019 | 12:00 PM
  #8  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
Originally Posted by oldcutlass
One thing at a time. Is the dash pot for the instrument lights turned up all the way? Is there voltage at both sides of the fuse box lamp fuse?
Yeah there is power to both sides of the fuses , and yes makes no difference turning the dash pot
Old Jun 18, 2019 | 12:52 PM
  #9  
ignachuck's Avatar
Frank Ignachuck
 
Joined: Jan 2012
Posts: 1,302
From: Maynard, Massachusetts
As Eric said, one thing at a time. Your schematic is your friend.
Old Jun 18, 2019 | 12:57 PM
  #10  
Oldsfan's Avatar
Registered User
 
Joined: Jul 2006
Posts: 331
The radio dial light is independent of the others. If the radio is not turned on, the dial will not light.
Old Jun 18, 2019 | 01:22 PM
  #11  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
Originally Posted by Oldsfan
The radio dial light is independent of the others. If the radio is not turned on, the dial will not light.
[SPOILER[/SPOILER] radio won’t turn on. Is the radio grounded through the Antenna? I noticed yesterday it’s unhooked in the fender,
Old Jun 18, 2019 | 07:58 PM
  #12  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,496
From: Poteau, Ok
You need to follow the gray wires under the dash, all gray wires are lighting. Double check the ground side also.
Old Jun 18, 2019 | 10:32 PM
  #13  
Jeff99's Avatar
Thread Starter
Registered User
 
Joined: Jun 2019
Posts: 117
From: Mi
Got the lights working it was the headlight switch. Must of been rusted inside. After turning it and a little wd40 it works. And found a wire off the radio so that comes on but no sound at all .. and I don’t think the clock will work. I can’t turn the **** on the front so guessing it’s rusted inside... thanks fir all that help

Last edited by Jeff99; Jun 19, 2019 at 07:55 AM.
Old Jun 18, 2019 | 11:07 PM
  #14  
oldcutlass's Avatar
Administrator
 
Joined: Oct 2009
Posts: 42,496
From: Poteau, Ok
The radio has a separate ground other than the antenna. If you hear nothing at all I would say the speaker is shot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
73aussie455
Eighty-Eight
2
Oct 1, 2016 12:34 AM
cmfjay
Electrical
11
Sep 16, 2014 04:50 PM
bcg88
Electrical
10
Apr 28, 2012 11:02 AM
2 door cut
Cutlass
2
Feb 15, 2007 01:45 AM
2 door cut
Electrical
1
Dec 29, 2006 03:02 PM


Thread Tools
Search this Thread

All times are GMT -7. The time now is 11:18 PM.