When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just need the controller portion, not the entire mirror and cable.
I soaked mine in evapo rust for a couple of weeks and it just fell apart I'll have to see what's left of the pot metal.
I just need the controller portion, not the entire mirror and cable.
I soaked mine in evapo rust for a couple of weeks and it just fell apart I'll have to see what's left of the pot metal.
I have a control setup on my '68 parts car, if you are interested I could get out there after this wet weather clears out and get it to you for $15.00 plus shipping.
there is some rust on the shaft of the control **** so this is not show car quality. I would probably just cut off the cables and ship it intact.
I have a control setup on my '68 parts car, if you are interested I could get out there after this wet weather clears out and get it to you for $15.00 plus shipping.
there is some rust on the shaft of the control **** so this is not show car quality. I would probably just cut off the cables and ship it intact.
Awesome. See this is exactly what I miss in today's world of car restoration etc. I love people that actually care instead of the dollar. Good for you Brother.
Easier than cutting the cable is to just unscrew the **** and the mechanism will come apart. It's shaft is screwed into the plastic center piece. I found that out when the plater showed me on my 1969 mirror after no one else could figure out how to take the cables off.
